| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mv643xx: move setting of netops to fix crash
mv643xx_eth_probe() connects the PHY before dev->netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ctcm: Prevent XID null dereference
The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40
to signal XID validation error. If peer XID is NULL or r/w channel
pairing mismatch happens, grp->saved_xid2 is never initialized. An
attempt to set the flag in such case leads to NULL dereference.
Fix this by using the always available priv->xid->xid2_flag2 instead of
grp->saved_xid2->xid2_flag2 for validation errors. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL sink dereference in USB4 bandwidth functions
allocate_usb4_bandwidth_for_stream() and allocate_usb4_bandwidth() both
use ASSERT(stream->sink) before dereferencing stream->sink->link. ASSERT
is compiled out in production builds, so a NULL stream->sink causes a
NULL pointer dereference.
link_set_dpms_off() already guards two earlier accesses to stream->sink
with explicit NULL checks, confirming that stream->sink can legitimately
be NULL. The subsequent call to deallocate_usb4_bandwidth() had no
equivalent guard.
Replace the ASSERT() calls with proper NULL checks that return false
early, and add a matching stream->sink guard at the call site in
link_set_dpms_off() consistent with the surrounding pattern.
v2: Keep the existing ASSERT() calls for diagnostics (to report
unexpected NULL sink), and add explicit NULL checks that return false
before dereferencing stream->sink. Also add a matching stream->sink
guard at the deallocation call site in link_set_dpms_off(). (Alex)
(cherry picked from commit 98029a0ce61feb52c563f65349dd9b25f672e355) |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx()
On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one
sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[]
shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma()
dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader()
writes two such indices into meta->buffers[], which rb_cpu_meta_valid()
would reject on the next boot, discarding the previous boot's trace.
A CPU's sub-buffer array starts after its meta header and the nr_subbufs
integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx()
inverts that calculation but skips only the integers, not the header, so
its base is one sub-buffer low whenever the omitted header size crosses
the alignment boundary.
Invert the calculation with rb_subbufs_from_meta() rather than repeating
it. rb_range_buffer() maps an index back to an address through the same
helper, so the two directions can no longer disagree. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Check per-CPU register page before mmap
Register-page setup is optional for each CPU. If allocation or
registration fails, mshv_vtl_configure_reg_page() warns and leaves that
CPU's reg_page NULL, but initial context setup continues successfully.
Meanwhile, successful setup on another CPU sets the global
mshv_has_reg_page flag.
mshv_vtl_fault() checks this global flag before selecting the requested
CPU's register page. With mixed setup results across online CPUs, the
check passes even for a CPU with no register page, reaching
get_page(NULL) when userspace faults in that mapping.
Check the selected per-CPU register page before taking its reference and
return VM_FAULT_SIGBUS if it is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: free the sbi after a grace period
ext4_get_link() follows a symlink that keeps its target in a data block
in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT).
That reads s_mount_state in the ASSERT() of ext4_getblk() and again in
ext4_es_lookup_extent(), and the lookup bumps the extent status hit or
miss counter, all through sb->s_fs_info.
ext4_put_super() destroys those counters, clears sb->s_fs_info and frees
the sbi without waiting for a grace period. A pathwalk that is still in
ext4_get_link() when the last reference to the mount goes away then
dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu
counters.
With a pathwalk held up in ext4_get_link() while the last reference
goes away:
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:ext4_getblk+0xf0/0x640
Call Trace:
<TASK>
ext4_get_link+0x26c/0x410
pick_link+0xf96/0x1780
step_into_slowpath+0x9b8/0x1250
path_lookupat+0x484/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
So far that has been hard to hit. umount(2) waits for a grace period in
namespace_unlock() before it drops the mount, so only a mount whose last
reference goes away elsewhere, like the close of a file or a chdir out of
a lazily unmounted directory, can race a walker.
Keep sb->s_fs_info and free the sbi together with the extent status
counters after a grace period. Split the counters out of
ext4_es_unregister_shrinker() for that. The shrinker still gets wasted
in ext4_put_super(), the counters go with the sbi. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry
Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails
in the "not from VM-Entry" case, i.e. when emulating RSM or handling
KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM
trying to run L1 with a nested MMU, and is especially problematic if the
vCPU manages to free its nested state before the VM crashes. Constructing
the root for a nested EPT MMU goes through vmcs12, which is dynamically
allocated/freed when nVMX is enabled/disabled. And so if the nested state
is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL
pointer deref when attempting to get L1=>L2 EPTP.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
Call Trace:
<TASK>
kvm_mmu_load+0xcd/0x870 [kvm]
kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x9c/0x4d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47491b
</TASK>
Modules linked in: kvm_intel kvm irqbypass
CR2: 0000000000000078
---[ end trace 0000000000000000 ]---
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
[sean: write changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash in print_graph_function_event()
tracing_set_tracer() assigns the flags of the newly selected tracer
with:
tr->current_trace_flags = t->flags ? : t->tracer->flags;
If the new tracer defines neither static flags nor default flags, like
hwlat, irqsoff or wakeup, add_tracer() has no per instance flags copy
for it, and both operands are NULL, so tr->current_trace_flags ends up
being NULL as well.
The ring buffer is not cleared when switching tracers: it is reset
inside tracer_init(), after current_trace_flags was already assigned.
If the buffer still holds function_graph entries of the previous
tracer, printing one of them dereferences the NULL pointer. This was
hit by cat trace during an ftrace stress test:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
RIP: 0010:print_graph_function_event+0xe/0x20
Call Trace:
s_show+0x4d/0x110
seq_read_iter+0x2d4/0x490
seq_read+0x130/0x170
vfs_read+0xb5/0x370
ksys_read+0x6d/0xe0
do_syscall_64+0xbc/0x450
The snapshot buffer is not reset at all, so this can be reproduced
without a race:
echo function_graph > /sys/kernel/tracing/current_tracer
echo 1 > /sys/kernel/tracing/snapshot
echo hwlat > /sys/kernel/tracing/current_tracer
cat /sys/kernel/tracing/snapshot
Rather than teaching every user of tr->current_trace_flags about this
corner case, make sure it is never NULL: when the newly selected
tracer has no flags at all, tracing_set_tracer() falls back to a
static empty no_tracer_flags. run_tracer_selftest() can hit the same
case, so the same fallback is added there too. The existing users
already handle opts == NULL, so these tracers keep behaving as before. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen/scsifront: Check for a NULL shadow entry on a backend response
scsifront_do_response() validates the rqid in a backend response against
VSCSIIF_MAX_REQS before using it to index info->shadow[], but then
dereferences the entry to test ->inflight without checking that the slot
is populated. Shadow slots are NULL before a command is submitted (the
host private area is zeroed at allocation) and are reset to NULL in
_scsifront_put_rqid() once a request completes, so an in-range rqid that
does not correspond to an outstanding request makes the frontend
dereference a NULL pointer.
A malicious or buggy backend can thus crash the guest by returning a
response whose rqid is in range but not in flight -- for example a
spurious response before any command has been issued, or a duplicate of
one already completed. The ring has only VSCSIIF_MAX_REQS (16) slots,
so before the first command every in-range rqid selects a NULL slot.
Reject a response whose shadow slot is not populated. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix data race and NULL deref on local->assoc_dev
local->assoc_dev is shared between the association path and the
association-response worker without common synchronization.
mac802154_perform_association() stores the coordinator pointer and waits
for a response. Its timeout and error paths clear the pointer and return
to mac802154_associate(), which may then free the coordinator object.
Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit
and enter mac802154_process_association_resp(), which dereferences
assoc_dev.
The worker's bit test and the handler's pointer dereference are not
atomic with respect to cleanup. Cleanup can clear assoc_dev between them,
causing a NULL dereference, or free the coordinator while the response
handler still uses the pointer.
The recorded result is exposed to the same window. assoc_status and
assoc_addr are written by the handler but read by the association path
while the associating bit is still set, so a second response for the same
request - a malicious one, for instance - can replace them between those
reads and leave the caller with an incoherent status and address pair.
The response handler only needs the coordinator extended address.
Replace assoc_dev with a cached address, removing the pointer lifetime
dependency. Protect the cached address and the associating bit with a
dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee
an atomic __le64 access on all 32-bit architectures.
wpan_dev->association_lock cannot be reused here: nl802154_associate()
holds it across rdev_associate(), hence for the whole of
mac802154_perform_association() including the wait for the response.
A response handler taking that lock would only get it once the
association has already given up.
Reset the completion, publish the cached address, and set the associating
bit while holding the lock. The response handler takes the lock, rechecks
the bit and the cached address, records the response, clears the bit, and
only then completes the waiter. Thus cleanup cannot pass the handler
between its state check and completion, and the cached 64-bit value
cannot tear.
The handler clears the bit before completing, not the woken waiter:
otherwise complete() is issued under the lock and a second (e.g.
malicious) response can reacquire it before the waiter and replace the
result. So a wait that returns success implies the bit is already clear,
and the success and negative-response paths return directly. The
transmit-error and timeout paths still clear it under assoc_lock, which
serializes any racing response against the cleanup while the call returns
the error it already selected. Both paths snapshot assoc_status and
assoc_addr under the same lock.
Both users run in process context, so a plain spinlock is sufficient.
The lock is not held while waiting for the completion. |
| libexpat through 2.9.0 contains a NULL pointer dereference vulnerability in externalEntityInitProcessor2() in lib/xmlparse.c that mishandles the XML_TOK_NONE token from empty input. Attackers who control stream chunking can force an empty non-final first parse on an external entity subparser, causing a later parse to crash the application. |
| Invalid pointer in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Invalid pointer in the JavaScript Engine component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Invalid pointer in the Nimbus Desktop Client component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a NULL pointer dereference in the `Asterisk Manager Interface (AMI)` may allow an unauthenticated attacker to crash Asterisk when `Digest Authentication` is used via `HTTP`. The Asterisk `HTTP` web server, AMI, and AMI access via `HTTP` must all be enabled; each is disabled by default. The attacker must be able to connect to the `HTTP` server, which binds only to `127.0.0.1` by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Tanium addressed a denial of service vulnerability in Enforce. |
| A NULL pointer dereference vulnerability in WatchGuard Fireware OS’s management interface allows a remote, unauthenticated attacker with network access to the management interface to crash the management service by sending a specially crafted login request. Repeated exploitation terminates all active administrator sessions and in-progress management operations and can prevent management of the device. Traffic processing is not affected. |
| Pillow is a Python imaging library. From 12.0.0 until 13.0.0, Pillow's Image.merge() can dereference a null image8 plane. Validation skips the first input band, allowing a 32-bit integer or floating-point image backed by image32 storage to be merged as a narrower multiband image. A crafted IPTC file can reach this path when an application opens and loads it, or a caller can invoke Image.merge() directly with such a first band. This causes a native process crash. This issue is fixed in version 13.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: validate the superblock on resume
dm_integrity_resume() re-reads the superblock from the device so that it
picks up the flags and the recalculate position. It performs no
validation on the result, while the constructor validates the superblock
it reads and sizes all the in-memory structures according to it. The user
may modify the superblock on the underlying device while the dm-integrity
device is suspended, so that the two no longer agree.
In particular, access_journal_data() shifts the journal entry index by
ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the
journal page list were computed with the value that was present at
constructor time. Increasing log2_sectors_per_block makes the index run
past the end of the journal, and dm-integrity then writes 512 bytes
through lowmem_page_address(NULL).
Snapshot the validated superblock in the constructor and refuse to resume
if any of the fields that describe the on-disk geometry changed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Properly acquire queue buffers in CRIU restore
When kfd_queue_acquire_buffers() was split off from
set_queue_properties_from_user(), set_queue_properties_from_criu()
was missed. Thus, set_queue_properties_from_criu() is not
filling out the buffer fields of queue_properties, which
can come up when subsequent code expects them to be non-null.
Add the proper call to kfd_queue_acquire_buffers(), and also
use the right cast types in set_queue_properties_from_criu()
(which were missed at the same time)
(cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) |
