| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: replace bind when learning local endpoint
struct ovpn_bind is published through peer->bind with RCU, but local
endpoint learning updates bind->local in place under peer->lock. UDP TX
reads the field without that lock. In particular, a concurrent IPv6
update can therefore result in a torn address read.
Use ovpn_peer_reset_sockaddr to publish a replacement bind when learning
a new local endpoint, just as a remote endpoint change does. Preserve
the current remote address and reset the dst cache only after the new
bind has been published successfully.
Track remote endpoint changes separately so that float notification and
transport-address rehashing remain limited to actual peer floats. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: serialize buffer teardown with mode claims
Buffer-mode claims hold mlock to guarantee that the device remains in
buffer mode until the claim is released. Normal buffer updates take
info_exist_lock followed by mlock in iio_update_buffers().
However, iio_device_unregister() disables and deactivates all buffers
without taking mlock. This can invalidate buffer state, including
active_scan_mask, while a buffer-mode claim is held.
Take mlock in iio_disable_all_buffers() so that unregister honors the
mode-claim lifetime guarantee. The info_exist_lock -> mlock ordering
matches iio_update_buffers(). |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Don't access a DP tunnel after its DPRX read was canceled
tb_dp_dprx_work() checks ->dprx_canceled before it takes tb->lock so it
misses a tb_dp_dprx_stop() that could not cancel the already running
work. It then polls the DPRX capabilities and runs the callback for a
tunnel that has already been torn down while the domain is suspending or
going away.
This can be hit by cancelling the DPRX read from outside the ordered
tb->wq: During suspend tb_disconnect_and_release_dp() does just this and
with a later patch tb_stop() will do it as well. The latter in combination
with the Apple NHI where the DPRX read never completed is how I hit
this.
Check the flag with tb->lock held instead and check it again in
tb_dp_tunnel_active() because the callback runs after the lock has been
dropped again.
Also clear the flag in tb_dp_dprx_start() so that it only ever describes
the work that is currently in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
The invalidHandle, swapfile, oplock_break_cancelled, offload,
and status_file_deleted fields are stored in the same bitfield byte
in struct cifsFileInfo, but are updated in different code paths that
may run simultaneously, and are protected by different locks. Since
bitfield assignments generate byte-level read-modify-write operations,
a modification to one flag can overwrite a concurrent modification to
another flag.
To avoid these races, convert these flags from a bitfield to
separate bool fields. |
| Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix racy access to FDP placement id array
nvme_query_fdp_info() is called per-path and therefore prone to races.
It populates head->nr_plids/head->plids for fdp registration.
But nothing protects that pair from concurrent access - two paths scanning
the same namespace can race to populate it.
Avoid the race by moving this initialization work to nvme_alloc_ns_head()
which is called once per shared namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix race between perf_event_exit_task() and perf_pending_task()
A race condition exists between perf_event_exit_task() and
perf_pending_task() during begin_new_exec().
During begin_new_exec(), perf_event_exit_task() may be called, and the
PF_EXITING flag is not set on task. So perf_sigtrap() continues to execute
and triggers WARN_ON_ONCE(event->ctx->task != current).
Since both task exit and exec paths can call perf_event_exit_task() which
sets ctx->task to TASK_TOMBSTONE, fix this by explicitly checking if
event->ctx->task equals TASK_TOMBSTONE and dropping the redundant
PF_EXITING check. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event()
Sashiko points out the radix_tree itself is RCU safe, but nothing ever
frees the mlx4_srq struct with RCU, and it isn't even accessed within the
RCU critical section. It also will crash if an event is delivered before
the srq object is finished initializing.
Use the spinlock since it isn't easy to make RCU work, use
refcount_inc_not_zero() to protect against partially initialized objects,
and order the refcount_set() to be after the srq is fully initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained
hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work
unconditionally. They can run from the L2CAP/SCO/ISO socket send path
while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN
racing with a socket write). Since that queue_work() is not chained
work from the tx_work worker itself, __queue_work() sees the queue
marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops
the work:
WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work
Call Trace:
queue_work_on
l2cap_chan_send
l2cap_sock_sendmsg
...
hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before
draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer()
check it before queuing. Route the tx_work producers through the
same guard via a shared hci_sched_tx() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix subbuf resize races with trace_pipe_raw readers
Concurrent subbuffer resizes may crash trace_pipe_raw readers or leak
uninitialized memory to userspace due to stale size values.
Modify ring_buffer_alloc_read_page() to handle the resizing of an
existing buffer_data_read_page if necessary and add a new
ring_buffer_read_page_size(). This new function enables ring-buffer
buffer_data_read_page users to not call the racy
ring_buffer_subbuf_size_get(). This makes the spare_size member of
ftrace_buffer_info redundant.
Finally, handle buffer_data_read_page/reader_page order discrepancy in
ring_buffer_read_page(). On a mismatch simply copy manually the data to
the buffer_data_read_page. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: prevent race between disconnect() and rtx
Sashiko noted that the two event can race, leading to inconsistent
status. Prevent the race using the synchronous timer stop operation. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock
The fcport->unsol_ctx_head list is modified from several contexts without
a common lock. Entries are added in qla2xxx_process_purls_iocb() from the
response queue ISR (under the qpair qp_lock), while they are removed from
qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp()
(NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB
completion). The qpair qp_lock cannot serialize this per-fcport list since
multiqueue adapters add entries through different qpairs, so a concurrent
add and delete (or two concurrent deletes) can corrupt the list pointers.
Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in
qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del()
on unsol_ctx_head. The add nests under the existing qp_lock; no delete path
takes qp_lock, so the lock order is consistent and deadlock free. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: ibss: wait for in-flight TX on disconnect
While leaving an IBSS in ieee80211_ibss_disconnect() mac80211 flushes
stations, turns the carrier off and immediately tells the driver to
leave as well. While there may be synchronize_net() in station flush
and in this code later, packets can still be transmitted due to
cross-CPU race conditions after carrier off is set.
Therefore, it's possible for a race to happen where a TX to the
driver occurs while or after telling it to leave the IBSS. This can
be confusing to drivers, and in the case of iwlwifi leads to an
attempt to use invalid queues.
Move netif_carrier_off() to occur before sta_info_flush() during
IBSS disconnect, and add synchronize_net() if flushing didn't,
so that the synchronize_net() always happens between turning the
carrier off and telling the driver, avoiding this race. |
| In the Linux kernel, the following vulnerability has been resolved:
sockmap: Fix use-after-free in udp_bpf_recvmsg()
syzbot reported use-after-free of struct sk_msg in sk_msg_recvmsg(). [0]
sk_msg_recvmsg() peeks sk_msg from psock->ingress_msg under a lock,
but its processing is lockless.
Thus, sk_msg_recvmsg() must be serialised by callers, otherwise
multiple threads could touch the same sk_msg.
For example, TCP uses lock_sock(), and AF_UNIX uses unix_sk(sk)->iolock.
Initially, udp_bpf_recvmsg() had used lock_sock(), but the cited
commit removed it.
Let's serialise sk_msg_recvmsg() with lock_sock() in udp_bpf_recvmsg().
Note that holding spin_lock_bh(&sk->sk_receive_queue.lock) is not
an option due to copy_page_to_iter() in sk_msg_recvmsg().
[0]:
BUG: KASAN: slab-use-after-free in sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428
Read of size 4 at addr ffff88814cdcf000 by task syz.0.24/6020
CPU: 1 UID: 0 PID: 6020 Comm: syz.0.24 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428
udp_bpf_recvmsg+0x4bd/0xe00 net/ipv4/udp_bpf.c:84
inet_recvmsg+0x260/0x270 net/ipv4/af_inet.c:891
sock_recvmsg_nosec net/socket.c:1078 [inline]
sock_recvmsg+0x1a8/0x270 net/socket.c:1100
____sys_recvmsg+0x1e6/0x4a0 net/socket.c:2812
___sys_recvmsg+0x215/0x590 net/socket.c:2854
do_recvmmsg+0x334/0x800 net/socket.c:2949
__sys_recvmmsg net/socket.c:3023 [inline]
__do_sys_recvmmsg net/socket.c:3046 [inline]
__se_sys_recvmmsg net/socket.c:3039 [inline]
__x64_sys_recvmmsg+0x198/0x250 net/socket.c:3039
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb319f9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb31ad97028 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007fb31a216090 RCX: 00007fb319f9aeb9
RDX: 0000000000000001 RSI: 0000200000000400 RDI: 0000000000000004
RBP: 00007fb31a008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000040000021 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fb31a216128 R14: 00007fb31a216090 R15: 00007ffe21dd0a98
</TASK>
Allocated by task 6019:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x3d1/0x6e0 mm/slub.c:5780
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
alloc_sk_msg net/core/skmsg.c:510 [inline]
sk_psock_skb_ingress_self+0x60/0x350 net/core/skmsg.c:612
sk_psock_verdict_apply net/core/skmsg.c:1038 [inline]
sk_psock_verdict_recv+0x7d9/0x8d0 net/core/skmsg.c:1236
udp_read_skb+0x73e/0x7e0 net/ipv4/udp.c:2045
sk_psock_verdict_data_ready+0x12d/0x550 net/core/skmsg.c:1257
__udp_enqueue_schedule_skb+0xc54/0x10b0 net/ipv4/udp.c:1789
__udp_queue_rcv_skb net/ipv4/udp.c:2346 [inline]
udp_queue_rcv_one_skb+0xac5/0x19c0 net/ipv4/udp.c:2475
__udp4_lib_mcast_deliver+0xc06/0xcf0 net/ipv4/udp.c:2585
__udp4_lib_rcv+0x10f6/0x2620 net/ipv4/udp.c:2724
ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207
ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241
NF_HOOK+0x336/0x3c0 include/linux/netfilter.h:318
dst_input include/net/dst.h:474 [inline]
ip_sublist_rcv_finish+0x221/0x2a0 net/ipv4/ip_input.c:584
ip_list_rcv_finish net/ipv4/ip_inp
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Replace waitqueue and flag with completion
The driver previously used a waitqueue along with an explicit
request_done flag, but without proper barriers around request_done.
An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted
to fix this by adding the missing memory barriers. Rather than
adding the barriers, this patch replaces the waitqueue+flag with
a completion, which is designed for this exact purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync
Yue Sun reported a use-after-free and debugobjects warning in
udp_tunnel_nic_device_sync_work() during concurrent device operations.
The workqueue core clears the internal pending bit before invoking the
worker. At that point, a concurrent thread can queue the work again.
When the already running worker eventually clears the work_pending flag
to 0, it mistakenly clears the flag for the newly queued instance.
udp_tunnel_nic_unregister() then observes work_pending as 0 and frees
the structure while the second work item is still active in the queue,
leading to UAF.
Fix this by returning early in udp_tunnel_nic_device_sync() if
work_pending is already set, preventing redundant work queueing. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - protect service table iterations with service_lock
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
Fix this by holding service_lock across all list_for_each_entry()
iterations of service_table in adf_dev_init(), adf_dev_start(),
adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),
adf_dev_restarted_notify(), and adf_error_notifier().
The lock ordering is safe: callers of the static helpers (adf_dev_up()
and adf_dev_down()) acquire state_lock before service_lock, and no
event_hld callback or service_lock holder ever acquires state_lock in
the reverse order. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy
powerpc uses pt_frag_refcount as a reference counter for tracking it's
pte and pmd page table fragments. For PTE table, in case of Hash with
64K pagesize, we have 16 fragments of 4K size in one 64K page.
Patch series [1] "mm: free retracted page table by RCU"
added pte_free_defer() to defer the freeing of PTE tables when
retract_page_tables() is called for madvise MADV_COLLAPSE on shmem
range.
[1]: https://lore.kernel.org/all/7cd843a9-aa80-14f-5eb2-33427363c20@google.com/
pte_free_defer() sets the active flag on the corresponding fragment's
folio & calls pte_fragment_free(), which reduces the pt_frag_refcount.
When pt_frag_refcount reaches 0 (no active fragment using the folio), it
checks if the folio active flag is set, if set, it calls call_rcu to
free the folio, it the active flag is unset then it calls pte_free_now().
Now, this can lead to following problem in a corner case...
[ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62
[ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62
[ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff)
[ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000
[ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000
[ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
[ 265.362572][ T183] Modules linked in:
[ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY
[ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries
[ 265.364908][ T183] Call Trace:
[ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable)
[ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8
[ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08
[ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310
[ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218
[ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820
[ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300
[ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508
[ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148
[ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178
[ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0
[ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
The bad page state error occurs when such a folio gets freed (with
active flag set), from do_exit() path in parallel.
... this can happen when the pte fragment was allocated from this folio,
but when all the fragments get freed, the pte_frag_refcount still had some
unused fragments. Now, if this process exits, with such folio as it's cached
pte_frag in mm->context, then during pte_frag_destroy(), we simply call
pagetable_dtor() and pagetable_free(), meaning it doesn't clear the
active flag. This, can lead to the above bug. Since we are anyway in
do_exit() path, then if the refcount is 0, then I guess it should be
ok to simply clear the folio active flag before calling pagetable_dtor()
& pagetable_free(). |
