| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| WebDyne versions from 2.014 before 3.022 for Perl reflect request parameters unescaped into form field values, allowing cross-site scripting.
The textfield, password_field and filefield tags fill their value attribute from the request parameter of the same name. WEBDYNE_CGI_AUTOESCAPE, which controls escaping of these values, defaults to off. From 2.022, WebDyne::HTML::Tiny also replaced its entity_encode method with one that returns its input unchanged, so enabling WEBDYNE_CGI_AUTOESCAPE has no effect.
A remote attacker can inject script into any page using these tags through a crafted link. |
| WebDyne versions from 3.007 before 3.022 for Perl execute .psp files outside the document root via path traversal in the PSGI API route fallback.
When a request matches no file, the PSGI handler retries it as an API route through api_filename. That keeps .. segments in the request path and only checks that the joined path starts with the document root, which a request for /../private passes.
A remote attacker can run the embedded Perl in any .psp file the server can read, such as one uploaded to a directory outside the document root. |
| WebDyne versions from 2.014 before 3.022 for Perl issue session cookies without the Secure, HttpOnly and SameSite attributes.
WebDyne::Session sets its session cookie with only a name, value and path.
Browsers then send the session ID over plain HTTP and with cross-site requests, and expose it to page scripts. A network attacker or an injected script can steal the session, and another site can make requests that carry it. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix slab corruption from undersized DMA bounce buffers
Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for
ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers
with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but
maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e.
rounded up to the cache line size. As a result, the DMA API operates on
memory beyond the end of the allocation.
This was observed on a custom i.MX8MP platform with an mcp251xfd CAN
controller under heavy RPMSG load, as a series of refcount_t warnings
triggered from rpmsg_recv_done() in virtio_rpmsg_bus:
refcount_t: addition on 0; use-after-free.
refcount_t: underflow; use-after-free.
refcount_t: saturated; leaking memory.
Leading finally to an "Unable to handle kernel paging request" oops.
Reproducing this problem took between 30 minutes and roughly 30 hours
under the same workload.
Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed
it was overwritten from 2 to 1 by __pi_memcpy_generic() in the
irq/155-spi2.0 thread. Additionally it was found that a "normal"
rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In
the error case the same sequence took about 215µs +/-10µs. Based on
this, an LLM was used to identify the size mismatch fixed here.
Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover
the full mapped length, and use the same length for
dma_sync_single_for_cpu() to stay consistent with map and unmap.
With this patch applied, the same workload ran for more than 200 hours
without the problem reproducing. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Fix page dirtying in sev_gmem_post_populate()
set_page_dirty() requires that the caller holds some kind of lock to
ensure that the page's mapping does not concurrently go away.
That is not the case for a random page we got from get_user_pages_fast(),
so use set_page_dirty_lock().
[sean: tag for stable] |
| In the Linux kernel, the following vulnerability has been resolved:
unicode: free the map after a grace period
generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and
dereference the unicode map while a pathwalk in rcu mode holds nothing
but rcu_read_lock(). The filesystems that use them, ext4, f2fs and
tmpfs, drop the map with utf8_unload() from ->put_super(), which runs
when the last reference to the mount goes away. A lookup that is still
inside such a filesystem at that point reads a freed map.
With a pathwalk held up in utf8_casefold_hash() while the last reference
to a casefolded tmpfs goes away:
BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950
Read of size 8 at addr ff110001030fe658 by task walker/98
Call Trace:
<TASK>
utf8nlookup+0x74c/0x950
utf8byte+0x160/0x1560
utf8_casefold_hash+0x167/0x230
generic_ci_d_hash+0xdd/0x1c0
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 94:
__kmalloc_cache_noprof+0x249/0x560
utf8_load+0x4e/0x570
shmem_parse_opt_casefold.isra.0+0x92/0x270
[...]
Freed by task 97:
kfree+0x1db/0x5b0
shmem_put_super+0x72/0x170
generic_shutdown_super+0x14c/0x530
kill_anon_super+0x3a/0x60
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
So far that has been hard to hit. umount(2) waits for a grace period
in namespace_unlock() before it drops the mount, so only a mount whose
last reference goes away elsewhere, like the close of a file or a chdir
out of a lazily unmounted directory, can race a walker. So it is
reachable.
Delay the free until a grace period has passed. The map and the data
table it holds a reference to then outlive any pathwalk that found the
superblock before the mount went away. The reference on the data table
module is dropped from the rcu callback as well. utf8-core is built in
whenever CONFIG_UNICODE is set, so there is no module exit that would
have to wait for the callbacks.
Overlayfs points the s_encoding of an overlay at the map of its first
layer without taking a reference of its own. That stays correct. The
layer is held by the overlay, so its map is dropped only after the
overlay is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: validate packet source for connected sockets
vmci_transport_recv_stream_cb() looks up sockets first by the full source
and destination tuple, then by destination only in the bound table. The
fallback can select a non-listening socket without checking whether the
packet came from its stored peer.
This was reproduced with two VMCI contexts. A RST from the context not
stored in a TCP_SYN_SENT socket reset that socket after it was selected by
the destination-only lookup.
VMCI can process notification packets in bottom-half context when the
socket is not owned by user context, or defer packets to a workqueue. Use
vsock_check_source() after taking the socket lock in the bottom-half path,
and recheck after lock_sock() in the workqueue path. Listening sockets
continue to accept packets from any source.
Reply with a RST addressed from the received packet before dropping a
source that fails validation. This preserves the existing reset behavior
for bound non-listening and concurrently closed sockets without directing
the reset to a connected socket's stored peer. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Keep the predicate limit separate from program capacity
predicate_parse() adds two to nr_preds to reserve the terminal TRUE
and FALSE entries. It also uses that increased value as the limit for
parsed predicates. If the initial count is smaller than the number
actually parsed, the program can fill the allocation and subsequent
accesses can go past its end.
Keep nr_preds as the predicate limit and use a separate value for the
allocation size. This leaves space for both terminal entries and a
zeroed entry when parsing stops at the limit. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Reject non-stacktrace fields for synthetic stacktrace fields
In check_synth_field(), when a synthetic event field is a stacktrace
(field->is_stack) and the histogram field is not a "long[" stacktrace
array, validation falls through to the generic size and signedness
comparison.
Because parse_synth_field() sets a stacktrace field's type to
"__data_loc unsigned long[]", its size is sizeof(u64) and
synth_field_signed() marks it as signed. Consequently, any 8-byte
signed scalar histogram field passes the fallback check, and its scalar
value is subsequently dereferenced as a kernel stacktrace pointer in
get_field_size() and trace_stack().
Furthermore, checking strstr(hist_field->type, "long[") is insufficient
because tracepoint fields defined with __bitmask() or __rel_bitmask()
also have type "__data_loc unsigned long[]" or "__rel_loc unsigned
long[]", whilst create_hist_field() treats them as 4-byte scalar values
without HIST_FIELD_FL_STACKTRACE.
Propagate HIST_FIELD_FL_STACKTRACE to variable references and field
variables (whilst excluding variable aliases from per-element
stacktrace capture), and reject any mismatch between
HIST_FIELD_FL_STACKTRACE and field->is_stack in check_synth_field(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix heap overflow in cifs_do_set_acl()
cifs_set_acl() validates ACL size using posix_acl_xattr_size():
4 + (count * 8) // 4-byte header + 8 bytes per ACE
cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS
wire format into the same buffer:
6 + (count * 10) // 6-byte header + 10 bytes per ACE
An ACL that passes the xattr-based check in cifs_set_acl() can
overflow the heap when posix_acl_to_cifs() writes the larger CIFS
format.
Validate the CIFS format size against the remaining buffer space and
USHRT_MAX before converting--data_count is __u16, so sizes above
USHRT_MAX truncate the on-wire packet length, causing the server to
apply a partial ACL. Replace MaxDataCount = 1000 with
min(CIFSMaxBufSize, USHRT_MAX). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Validate the task named by a management response
__iscsi_complete_pdu() fetches the task for five response types from one
place and checks only that the index resolved:
case ISCSI_OP_LOGOUT_RSP:
case ISCSI_OP_LOGIN_RSP:
case ISCSI_OP_TEXT_RSP:
case ISCSI_OP_SCSI_TMFUNC_RSP:
case ISCSI_OP_NOOP_IN:
task = iscsi_itt_to_task(conn, hdr->itt);
if (!task)
return ISCSI_ERR_BAD_ITT;
iscsi_itt_to_task() bounds the index against cmds_max and looks at
nothing else, so a target can name any slot in the pool, including one
that has never been used. task->conn is then NULL, and both
iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One
unsolicited NOP-In is enough; a Text Response carrying the same ITT
crashes in iscsi_complete_task() instead.
Require the task to be in flight and not a SCSI command, the way
iscsi_itt_to_ctask() does for the command opcodes.
[ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI
[ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
[ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy)
[ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160
[ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00
[ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206
[ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020
[ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060
[ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000
[ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800
[ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000
[ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0
[ 6.298712] PKRU: 55555554
[ 6.298713] Call Trace:
[ 6.298714] <IRQ>
[ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0
[ 6.298758] iscsi_complete_pdu+0x54/0xa0
[ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80
[ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0
[ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390
[ 6.298804] __tcp_read_sock+0x1ab/0x810
[ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510
[ 6.298814] tcp_rcv_established+0x1f56/0x3a00
[ 6.298842] tcp_v4_do_rcv+0x449/0x960
[ 6.298847] tcp_v4_rcv+0x2245/0x3bc0 |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: Don't reset VMBus connection state on error/exit paths
In two places, current code forces vmbus_connection.conn_state to
DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect()
calls vmbus_initiate_unload(), which unloads the VMBus connection
only if the conn_state is CONNECTED. Consequently, the connection
remains and the Hyper-V host might continue to send messages or post
VMBus interrupts.
The problem was introduced in commit 74347a99e73ae ("x86/Hyper-V:
Unload vmbus channel in hv panic callback"), in that
vmbus_initiate_unload() started checking the current connection
state before doing the unload. This commit removed some occurrences
where conn_state was forced to DISCONNECTED, but these two remained,
apparently due to an oversight at the time.
Fix this by not forcing conn_state to DISCONNECTED during VMBus exit,
or if a failure occurs when establishing the connection in the first
place. Whatever value conn_state has at the time is then read by
vmbus_initiate_unload() to determine if there is a connection to
be unloaded. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure
rds_rdma_cm_event_handler_cmn() hands the return value of
rdma_resolve_route() straight back to the rdma_cm on
RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM
from the route work allocation, an SA query that cannot be set up, a
RoCE route with no usable device - makes addr_handler() destroy the
id the event was delivered on. That id is ic->i_cm_id, and nothing
clears the pointer: the connection sits in RDS_CONN_CONNECTING with a
freed id until its shutdown calls rdma_disconnect() and
rdma_destroy_id() on it.
The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect()
forces a zero return while ic->i_cm_id == cm_id, as the comment there
explains. Do the same here - drop the connection and return 0 - so
the id stays RDS's to destroy from the shutdown, and the reconnect
gets a fresh one. |
| In the Linux kernel, the following vulnerability has been resolved:
pipe: preserve existing fasync readers on writer setup failure
F_SETFL and FIOASYNC decide whether to invoke ->fasync() before
pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can
therefore both enter the callback.
fasync_helper() allocates before checking for an existing entry. If the
first enable installs both entries, a second enable can update the
reader entry and then fail the allocation for the writer entry. The
error path removes the pre-existing reader entry, clearing FASYNC while
the writer entry remains registered. __fput() then skips ->fasync(), so a
later pipe notification can dereference the freed file or its f_owner.
An unprivileged memory-pressure reproducer triggers a KASAN
slab-use-after-free in send_sigio() through this path.
Keep the reader helper's result and undo the registration only if this
call added it. The pipe mutex serializes changes to both lists, so a
failed new registration still removes its reader, while a failed
duplicate preserves the existing registrations and FASYNC. Successful
duplicate enables continue to update fa_fd as before. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Free the eventfs_inode after an rcu grace period too
tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that
dentry->d_fsdata points to, and ->d_revalidate() is called in rcu
pathwalk mode with nothing but rcu_read_lock() held. The dentry itself
stays around for such a walker, but tracefs_d_release() drops its
reference to the eventfs_inode when the dentry is killed, and
release_ei() then frees it after a grace period of eventfs_srcu. An
SRCU grace period doesn't wait for rcu_read_lock() sections, so the
walker can read an eventfs_inode that is already gone.
With a pathwalk held up in tracefs_d_revalidate() while the dentry goes
away:
BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90
Read of size 1 at addr ff1100010152d8d0 by task walker/97
Call Trace:
<TASK>
tracefs_d_revalidate+0x76/0x90
lookup_fast+0x320/0x640
path_lookupat+0x160/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
Allocated by task 1:
__kmalloc_cache_noprof+0x249/0x560
eventfs_create_dir+0x7a/0x590
event_create_dir+0x2fb/0xcf0
trace_add_event_call+0xbf/0x150
[...]
Freed by task 11:
kfree+0x1db/0x5b0
srcu_invoke_callbacks+0x3a3/0x620
process_one_work+0x937/0x1810
worker_thread+0x4f1/0xd60
Before commit 8e556432477e ("eventfs: Use SRCU for freeing
eventfs_inodes") release_ei() used call_rcu(), which covered the walker,
while eventfs_iterate() needs the SRCU grace period. Wait for both and
chain call_rcu() from the SRCU callback. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: a mount that copy_tree() leaves out can't take over a lock
Since commit c62a4766937e ("move_mount: transfer MNT_LOCKED") a mount
can be moved beneath a locked mount. The lock moves from the old cover
to the new mount which takes over the job of hiding what's under it and
the old cover can be unmounted. That works as long as the new mount
stays. But the caller picks the new mount and copy_tree() leaves a
mount of a mount namespace file out of every copy made without
CL_COPY_MNT_NS_FILE, together with everything mounted on it, and never
looks at MNT_LOCKED. unshare(CLONE_NEWNS) and mount propagation make
such copies.
So a task that is root in its own user namespace gets rid of a locked
cover on a file without a race and without touching the filesystem
below it. It makes a child with a mount namespace of its own, binds the
child's /proc/<pid>/ns/mnt beneath the cover with MOVE_MOUNT_BENEATH,
which hands the lock to that bind, and calls unshare(CLONE_NEWNS). The
new mount namespace has nothing on the file. That's the usual way to
mask a single file, a bind of /dev/null or of an empty file. With a
bind of an ordinary file the file stays covered.
copy_tree() already refuses to leave out a locked unbindable mount with
-EPERM since commit df7342b24018 ("mount: Don't allow copying
MNT_UNBINDABLE|MNT_LOCKED mounts"). Do the same for a locked mount of a
mount namespace file. That also covers a tree copied with
CL_COPY_MNT_NS_FILE and attached into a mount namespace of another user
namespace where lock_mnt_tree() locks it. Note that unshare(CLONE_NEWNS)
and clone(CLONE_NEWNS) fail with EPERM from such a mount namespace from
then on. The mount can't be left out and it can't be unmounted.
And refuse to move a mount of a mount namespace file beneath a locked
mount in the first place. Otherwise the task ends up with a mount it
can't unmount and an unshare() that fails for good.
Chris also found a second mount that goes away by itself, a clone of an
automounted mount that shrink_submounts() took along with its parent.
Commit f78ddcc87224 ("namespace: never expire a locked mount") took
care of that one.
Chris's reproducer is appended. Mode nsfile reads SECRET after the
unshare() on 7.3-rc7, with this patch the move_mount() fails with
EINVAL and the file stays covered. nsfile-control uses an ordinary file
and reads MASK both ways.
// SPDX-License-Identifier: GPL-2.0
/*
* Get rid of a locked cover with MOVE_MOUNT_BENEATH.
*
* The "admin" (root) makes a tmpfs W:
* W/D file, holds SECRET, covered by a bind of a file with MASK
* W/Dd/inner file, holds SECRET, Dd is covered by a bind of a directory
* whose "inner" holds MASK
* W/own directory of uid 1000 with the file "mine" and the
* directory "minedir", whose "inner" holds MINE
* W/dbg debugfs, mode 755. dbg/tracing is an automount point
* The "attacker" is uid 1000. It enters a new user namespace with a new mount
* namespace, so W and both covers are locked there.
*
* usage: prog MODE
* plain put a bind of own/mine beneath the cover of D, unmount the cover
* nsfile put a bind of the mount namespace file of a child beneath the
* cover of D, then unshare(CLONE_NEWNS)
* nsfile-control the same with a bind of own/mine
* shrink put a bind of the automounted tracefs beneath the cover of Dd,
* unmount the cover, put a tmpfs beneath W, call umount(W), which fails
* shrink-control the same with a bind of own/minedir
* The environment variable AUTOMOUNT_DIR names another automount point for "shrink".
*/
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <grp.h>
#include <sched.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: keep the eviction fence until the last handle is closed
amdgpu_gem_object_close() detaches the user queue eviction fence from
the BO before it checks bo_va->ref_count, so closing any handle of a BO
removes the fence, even when the file still has another handle to the
BO and the bo_va with its GPU mappings stays. The BO can then be evicted
without suspending the user queues of the file, which keep accessing it
through mappings that are only marked for update.
Seen on navi31 with a SDMA user queue: a BO opened twice in the same
file (GEM_FLINK + GEM_OPEN) loses its eviction fence when the second
handle is closed (traced attach/detach of the fence):
attach bo=ffff8c78a6c84c00
GEM_CLOSE handle=7
detach bo=ffff8c78a6c84c00
while handle 6 and the mapping are still in use.
Only detach the fence when the last reference to the bo_va goes away,
matching amdgpu_gem_object_open(), which attaches it only when the
bo_va is created. With this the fence stays until the file is closed.
(cherry picked from commit 8387982f03d4026b7dc11b0b5e3118298eee4d6a) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Check operator stack capacity before pushing
predicate_parse() uses the first operator stack entry before processing
any opening parentheses. A push then increments top before writing.
The existing check still permits that write when top already points to
the last allocated entry, which can access beyond the operator stack.
Reject the push when top reaches the last allocated entry. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-crypt: fix a tiny race condition in crypt_dec_pending
crypt_dec_pending reads io->error before calling atomic_dec_and_test.
Another context, for example crypt_endio called from an interrupt, may
set io->error and drop its reference between the read and the
decrement. crypt_dec_pending then drops the last reference and completes
the bio with the stale status - so a read that failed and was never
decrypted, or a write that failed, is reported as successful.
The read was placed before the decrement by commit b35f8caa0890 ("dm
crypt: wait for endio to complete before destruction"), because that
commit freed dm_crypt_io before calling bio_endio. This is no longer the
case, dm_crypt_io lives in the per-bio data now.
Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is
fully ordered, so no additional barrier is needed. |
