| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Check operator stack capacity before pushing
predicate_parse() uses the first operator stack entry before processing
any opening parentheses. A push then increments top before writing.
The existing check still permits that write when top already points to
the last allocated entry, which can access beyond the operator stack.
Reject the push when top reaches the last allocated entry. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-crypt: fix a tiny race condition in crypt_dec_pending
crypt_dec_pending reads io->error before calling atomic_dec_and_test.
Another context, for example crypt_endio called from an interrupt, may
set io->error and drop its reference between the read and the
decrement. crypt_dec_pending then drops the last reference and completes
the bio with the stale status - so a read that failed and was never
decrypted, or a write that failed, is reported as successful.
The read was placed before the decrement by commit b35f8caa0890 ("dm
crypt: wait for endio to complete before destruction"), because that
commit freed dm_crypt_io before calling bio_endio. This is no longer the
case, dm_crypt_io lives in the per-bio data now.
Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is
fully ordered, so no additional barrier is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix capability check in xfs
An user reported a bug where he managed to evade group's quota
by changing a file's gid to a different group id the same user
belonged to, even though quotas were enforced on both gids and the
file's size was big enough to exceed the quota's hardlimit.
Commit eba0549bc7d1 replaced a capable() call by a
has_capability_noaudit() to prevent unnecessary selinux audit messages.
Turns out that both calls have slightly different semantics even though
their documentation seems similar. Where in a nutshell:
capable() - Tests the task's effective credentials
has_ns_capability_noaudit() - Tests the task's real credentials
This most of the time has no practical difference but in some cases like
changing attrs (specifically group id in this case) through a NFS client
this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively
bypassing quota accounting checks.
Using instead ns_capable_noaudit() should fix this issue and prevent
selinux audit messages.
This also fix the remaining calls to has_capability_noaudit() |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: validate packet source for connected sockets
virtio_transport_recv_pkt() looks up sockets first by the full source and
destination tuple, then by destination only in the bound table. The
fallback is needed for listening and connecting sockets, but sockets remain
in the bound table after connect(), so it can also return a non-listening
socket.
The fallback does not validate the source address. In TCP_SYN_SENT, a
RESPONSE from an unrelated source can transition the victim socket to
TCP_ESTABLISHED while its stored remote address remains unchanged.
Subsequent RW packets from that source are delivered through the same
destination-only fallback.
This was reproduced with capability-empty processes under different UIDs.
The attacker discovered the target tuple through unprivileged AF_VSOCK
sock_diag and caused the victim socket to read 16 attacker-chosen bytes;
the intended peer-side socket read 0 of those 16 bytes.
Add vsock_check_source() to validate the transport, source port and source
CID against the peer stored in a non-listening socket. The local transport
is the CID exception because its packets are generated internally with
VMADDR_CID_LOCAL as their source, including connections using CID aliases.
Use the helper after lock_sock() in the virtio receive path. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: validate packet source for connected sockets
vmci_transport_recv_stream_cb() looks up sockets first by the full source
and destination tuple, then by destination only in the bound table. The
fallback can select a non-listening socket without checking whether the
packet came from its stored peer.
This was reproduced with two VMCI contexts. A RST from the context not
stored in a TCP_SYN_SENT socket reset that socket after it was selected by
the destination-only lookup.
VMCI can process notification packets in bottom-half context when the
socket is not owned by user context, or defer packets to a workqueue. Use
vsock_check_source() after taking the socket lock in the bottom-half path,
and recheck after lock_sock() in the workqueue path. Listening sockets
continue to accept packets from any source.
Reply with a RST addressed from the received packet before dropping a
source that fails validation. This preserves the existing reset behavior
for bound non-listening and concurrently closed sockets without directing
the reset to a connected socket's stored peer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: do not inherit the Rx association on clone
sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into
every socket accepted from a listener without taking a reference, while
inet_sock_destruct() puts for every inet socket. psp_twsk_init() does
refcount_inc() for the timewait socket, so a child closing through
TIME_WAIT cancels its own put and leaves the association with one
reference and N timewait sockets holding the same pointer. Closing the
listener frees it, and the timewait timers then put freed memory.
Rejecting the association on a listening socket is not sufficient: a socket
can acquire one while established and then be turned back into a listener,
because tcp_disconnect() leaves sk->psp_assoc in place.
BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0
Write of size 4 at addr ffff888110f9255c by task swapper/7/0
psp_twsk_assoc_free+0x6f/0xf0
inet_twsk_put+0xda/0x1b0
call_timer_fn+0x53/0x2e0
__run_timers+0x764/0xa80
Freed by task 99:
kfree+0x1a7/0x500
process_one_work+0x7ec/0x1100
An association carries a per-connection SPI and key, so a child must not
inherit the parent's. Clear it on clone. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: validate mask pointer after nla_next()
fl_set_enc_opt() iterates the key's nested tunnel-option attributes
with nla_for_each_attr() while advancing a single mask pointer via
nla_next() at the bottom of each loop, so the mask cursor is driven
by the number of key attributes rather than by the mask's own
attributes. The nla_ok() added by commit c96adff956191 ("cls_flower:
call nla_ok() before nla_next()") only validates the mask pointer
that was just consumed; the pointer produced by nla_next() is used by
the next iteration (fl_set_geneve_opt() and siblings) without any
validation.
The mask's nested attributes are validated with NL_VALIDATE_LIBERAL,
which merely warns on trailing bytes that do not form a complete
attribute. A mask carrying one valid attribute plus 1-3 residue
bytes (or a non-aligned attribute length making msk_depth negative)
therefore reaches the next iteration with msk_depth != 0, so neither
the !msk_depth check in fl_set_enc_opt() nor the !depth check in the
per-type helpers fires. nla_type() then reads past the mask payload
and nla_parse_nested_deprecated() iterates with an nla_len taken
from those bytes, reading well beyond the mask attribute (KASAN:
slab-out-of-bounds read in __nla_validate_parse from fl_change()).
Validate the advanced mask pointer as well: when the mask is not
legitimately exhausted (msk_depth != 0) and the new pointer fails
nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask
still skips the check, preserving exact-match behaviour for the
remaining key attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize
ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize().
When the attribute is in an extent record, ctx->mrec points to the extent
but the function receives the base record pointer m, causing incorrect
size calculations in memmove.
Fix by passing ctx->mrec (the actual MFT record containing the attribute)
instead of m (the base MFT record) to ntfs_attr_record_resize(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Fix AMD TLBI Erratum #1718
The processor may fail to invalidate a TLB entry while executing an
INVLPGB/TLBSYNC instruction pair.
Detect the erratum and apply a software workaround when a microcode fix
is not present. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix TX descriptor bounds check
btintel_pcie_prepare_tx() uses tfd_index to access the TFD and data
buffer arrays before the index is advanced modulo txq->count. An index
equal to txq->count is one past the end of both arrays, so reject it in
the bounds check. |
| The All in One SEO – AI SEO Plugin to Boost SEO Rankings & Traffic (Schema, Local SEO, Sitemap & SEO Insights) plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 5.0.3 via the 's' parameter. This makes it possible for unauthenticated attackers to extract arbitrary non-public post meta values, including sensitive custom fields such as API keys and internal notes, emitted verbatim into the HTML title element and JSON-LD SearchResultsPage schema. |
| The Newsletters plugin for WordPress is vulnerable to time-based SQL Injection via the 'id' parameter in all versions up to, and including, 4.18.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. An attacker can obtain the required nonce and subscriberauth cookie without a WordPress account by simply subscribing through the public newsletter form and opening the management link sent via email; the ownership check verifies only the subscriber_id field and does not validate that the injected id parameter belongs to the authenticated subscriber. |
| The SureCart – Ecommerce Made Easy For Selling Physical Products, Digital Downloads, Subscriptions, Donations, & Payments plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'comment' parameter in all versions up to, and including, 4.9.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful execution requires the injected comment to be visible on a page that loads SureCart's web-component bundle (e.g. a page containing a SureCart Buy Button block), and the comment must be auto-approved or approved by a moderator. |
| The Welcart e-Commerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'gid' parameter in all versions up to, and including, 2.12.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload is staged by an unauthenticated visitor who forges the ROBOT PAYMENT browser-return request, storing the malicious gid value in order metadata; the script then fires when an administrator opens that order in the WordPress admin panel. |
| A flaw was found in json-glib. The JSONPath slice evaluator used by json_path_query() can enter an infinite loop when given a slice expression with a negative step. An application that evaluates attacker-controlled JSONPath expressions can be forced into a hang, leading to a denial of service. |
| The Web 2.0 Directory plugin for WordPress is vulnerable to time-based SQL Injection via the 'w2dc_level_filter' parameter in all versions up to, and including, 2.10.12 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Because the parameter is used in integer context without surrounding quotes, WordPress's built-in addslashes/magic_quotes escaping provides no protection against time-based payloads such as SLEEP-based conditionals. |
| The VikRentCar Car Rental Management System plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'poplink' parameter in all versions up to, and including, 1.4.9 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The handler requires only a WordPress nonce (vikwp_nonce), which the plugin itself emits to unauthenticated visitors on the public booking-confirmation page, allowing an attacker to obtain a valid token without any account. |
| The SEOPress – AI SEO Plugin & On-site SEO plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'display_name' parameter in all versions up to, and including, 10.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is exploitable by any Subscriber who sets their display_name to a string containing the literal %%archive_title%% token alongside HTML event-handler payloads, as WordPress stores display names without HTML filtering and the plugin substitutes the token after escaping has already occurred. |
| The GeoDirectory – WP Business Directory Plugin and Classified Listings Directory plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'post_images' parameter in all versions up to, and including, 2.8.197 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload does not fire for the attacker directly; it executes in the browser of any Administrator or Editor who opens the pending listing's edit screen, making this a privilege-escalation-capable stored XSS chain triggered through normal editorial workflow. |
