| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing Authorization vulnerability in StylemixThemes Motors motors allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Motors: from n/a before 5.6.85. |
| The ECS WordPress plugin before 4.3.13 does not have capability or ownership checks on its dynamic repeater actions, relying only on a nonce available to any user who can open the page builder, allowing users with a contributor-level account or above to read, alter and delete the binding configuration of posts they do not own and to change the ECS WordPress plugin before 4.3.13's site-wide presets. |
| Access of resource using incompatible type ('type confusion') in DNS Server allows an authorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: do_close_on_exec() before taking exec_update_lock
do_close_on_exec() currently happens while holding the exec_update_lock,
which is used in a lot of places that access process state to
synchronize access checks.
I recently added another such use of exec_update_lock, causing a
regression.
do_close_on_exec() can block waiting for a reply from a filesystem.
That means a hung filesystem can block codepaths that use
exec_update_lock; and it also means that a FUSE filesystem which
attempts to inspect the calling process can deadlock.
To avoid such problems, move do_close_on_exec() before the
exec_update_lock is taken, but after the FD table has been copied if
necessary.
I have looked through all the calls between the old and new position of
the do_close_on_exec() call; there seems to be no file descriptor table
access in between. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: samsung: exynos-pmu: fix use-after-free of interrupt generator node
The setup_cpuhp_and_cpuidle() parses the device tree node for the
interrupt generation block via of_parse_phandle() and decrements its
reference count using of_node_put() immediately after fetching the resource
address. However, later the intr_gen_node pointer is passed into
of_syscon_register_regmap().
Fix this by declaring intr_gen_node with __free() and removing
of_node_put(). |
| The YITH WooCommerce Popup WordPress plugin before 1.60.0 does not check the capability of the requesting user before deleting post meta, allowing users with the Contributor role and above to delete arbitrary post meta from any post, including content owned by higher-privileged users. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait
in unix_stream_read_generic() if recv() is blocking and the last
skb in the queue is MSG_OOB skb.
In such a situation, TCP returns 0 immediately regardless of
blocking or non-blocking.
Let's follow the behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Invalidate stale class_cache entries for zapped classes
syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in
hlock_class() due to an invalid class_idx:
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203
Workqueue: wg-crypt-wg0 wg_packet_tx_worker
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline]
RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203
Call Trace:
<IRQ>
lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5886
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:173
tcp_tsq_handler+0x29/0x200 net/ipv4/tcp_output.c:1291
tcp_tsq_workfn+0x384/0x410 net/ipv4/tcp_output.c:1325
...
When a lock class is zapped (e.g. during module unload or key
unregistration), zap_class() clears the class's bit in
lock_classes_in_use and removes it from the class hash table.
However, existing lockdep_map instances embedded in data structures
may still retain a pointer to the zapped class in their class_cache[]
array.
When __lock_acquire() subsequently runs on such a lock, it finds
lock->class_cache[subclass] != NULL, skipping register_lock_class()
and assigning hlock->class_idx to the index of the zapped class. When
check_wait_context() or hlock_class() inspects the held_lock, it finds
!test_bit(class_idx, lock_classes_in_use) and warns. Furthermore, if
the zapped slot is subsequently re-allocated to an unrelated lock key,
the stale class_cache entry would erroneously match the unrelated
class (ABA issue).
Add lock_class_cache_is_valid() to validate that the cached class is
within lock_classes bounds, still allocated in lock_classes_in_use
(using uninstrumented arch_test_bit() in __always_inline context so it
is safe in noinstr contexts like match_held_lock()), and that
class->key matches the expected subkey (taking lockdep_set_subclass()
overrides into account). Also use READ_ONCE()/WRITE_ONCE() when
accessing class_cache[]. If the entry is invalid or stale, fall back
to register_lock_class() / look_up_lock_class(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: follow SMB2 session expiration semantics
ksmbd_session_register() destroys valid sessions after ten seconds of
inactivity whenever a client starts another SessionSetup exchange. This
confuses Session.IdleTime with Session.ExpirationTime. Windows can create
additional authenticated sessions on an existing connection, so deleting
the older session invalidates its tree connects and makes mapped drives
fail with STATUS_NETWORK_NAME_DELETED.
The session expiration rules require the server to change a valid session
to expired only after its credential expiration time passes. A valid or
expired session otherwise keeps its connection from being scavenged.
Connections that have not negotiated a dialect, have no sessions, or have
only InProgress sessions are disconnected after an implementation-specific
timeout. Use the Windows-compatible 45 second value and run the expiration
check periodically for both TCP and SMB Direct.
Keep zero as an infinite credential expiration time, and count each
Valid-to-Expired transition. Set expired sessions to InProgress when they
reauthenticate. If authentication fails, remove the session from the
global and per-connection tables immediately, including SMB3 multichannel
connections.
Retain protection against abandoned SessionId-zero exchanges by allowing
only one InProgress authentication per connection. Additional exchanges
fail with STATUS_INSUFFICIENT_RESOURCES, and stale InProgress sessions are
reaped after the same 45 second setup timeout. This bounds the original
unauthenticated memory-exhaustion path without evicting established
sessions. |
| Untrusted pointer dereference in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Keep admin queues alive while IRQ is registered
The management IRQ handler accesses both the admin completion queue and the
async event queue. The driver registered the IRQ before constructing these
queues and destroyed them before freeing the IRQ, so the handler's lifetime
was not contained by the resources it accesses.
Initialize the queues with interrupts masked, request the IRQ, and then
switch to interrupt mode. On removal, reset the device and free the IRQ
before destroying the queues. Also reset the device before destroying the
queues if IRQ registration fails, because the device already has their DMA
addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: codel: bound the dropping loop per dequeue call
The CoDel control law schedules the next drop one interval/sqrt(count)
after the previous drop, using the configured interval
(codel_params.interval). For very small intervals the scheduled step
rounds down to zero, so the dropping loop in codel_dequeue() never
advances and drains the entire backlog under the qdisc lock in one
call - an unprivileged user can trigger a soft lockup this way.
Fix in the shared codel code used by both codel and fq_codel:
1. Make the control-law step at least 1 tick so the dropping loop
always moves forward.
2. Cap the dropping loop at CODEL_MAX_DROPS_PER_DEQUEUE (256) drops
per codel_dequeue() call, resyncing drop_next to now when the cap
is hit: the catch-up owed to the loop grows with the idle gap and
the backlog, which no interval threshold can bound. This is a
deliberate behaviour change after long idle gaps.
The cap applies to fq_codel (4b549a2ef4be) and the mac80211 TXQ path
(fixed interval, cap only).
The target sojourn delay (codel_params.target) is not validated: it
does not feed the control law, so a sub-tick value is aggressive
rather than deadlock-prone.
Conditions to recreate the bug:
- tc qdisc add dev lo root handle 1: tbf rate 1kbit burst 2kb limit 1000000
- tc qdisc add dev lo parent 1:1 handle 10: codel interval 2us target 1ms noecn limit 1000000 (same for fq_codel)
- unpatched kernel: tc accepts it; a UDP flood under the 1kbit tbf
soft-lockups (watchdog: BUG: soft lockup) while one
codel_dequeue() call drops the backlog under the qdisc lock
- patched kernel: same setup, at most 256 drops per dequeue call,
no soft lockup
Testing: claim reproducer and interval 2us/3us variants run clean;
tdc qdisc category passes (see the selftests patch). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: 6fire: Avoid embedded URBs
The USB 6fire driver uses URBs embedded in different structs for PCM,
MIDI and communication, and this is basically a buggy implementation
nowadays; since a URB is managed with a refcount, this may lead to a
UAF when the URB is released asynchronously.
For addressing the problem, this patch converts those embedded URBs to
ones that are properly allocated via usb_alloc_urb(). The
pcm_urb.packets[] is gone, as it's allocated by usb_alloc_urb(), hence
it's found in urb.iso_frame_desc[] instead.
The conversions are rather straightforward; each embedded struct urb
is changed to a pointer, and its callers are updated accordingly.
The resource for those structs are released in the common destructor
functions (usb6fire_comm_free(), etc), which are called at both the
init error path and the disconnect.
No functional changes, only compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Keep EQ resources alive while IRQ is registered
The completion IRQ handler accesses the EQ state and DMA buffer. Its IRQ was
registered before that state was initialized, while teardown released the
buffer before free_irq() synchronized the handler.
Initialize the EQ without arming it, register the IRQ, and then arm it.
Reverse the resource order during teardown by freeing the IRQ before
destroying the EQ. |
| Missing authorization in Microsoft Office SharePoint allows an authorized attacker to elevate privileges over a network. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in ASP.NET Core allows an authorized attacker to elevate privileges over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
Savino says:
"We are writing to report that this recent patch
(141d34391abbb315d68556b7c67ad97885407547) [1]
can be bypassed, and a UAF can still occur when HFSC is utilized with
NETEM.
The patch only checks the cl->cl_nactive field to determine whether
it is the first insertion or not [2], but this field is only
incremented by init_vf [3].
By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the
check and insert the class twice in the eltree.
Under normal conditions, this would lead to an infinite loop in
hfsc_dequeue for the reasons we already explained in this report [5].
However, if TBF is added as root qdisc and it is configured with a
very low rate,
it can be utilized to prevent packets from being dequeued.
This behavior can be exploited to perform subsequent insertions in the
HFSC eltree and cause a UAF."
To fix both the UAF and the infinite loop, with netem as an hfsc child,
check explicitly in hfsc_enqueue whether the class is already in the eltree
whenever the HFSC_RSC flag is set.
[1] https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=141d34391abbb315d68556b7c67ad97885407547
[2] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1572
[3] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L677
[4] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1574
[5] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: Prevent creation of classes with TC_H_ROOT
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
Following process will trigger an infinite loop in ubi_wl_put_peb():
ubifs_bgt ubi_bgt
ubifs_leb_unmap
ubi_leb_unmap
ubi_eba_unmap_leb
ubi_wl_put_peb wear_leveling_worker
e1 = rb_entry(rb_first(&ubi->used)
e2 = get_peb_for_wl(ubi)
ubi_io_read_vid_hdr // return err (flash fault)
out_error:
ubi->move_from = ubi->move_to = NULL
wl_entry_destroy(ubi, e1)
ubi->lookuptbl[e->pnum] = NULL
retry:
e = ubi->lookuptbl[pnum]; // return NULL
if (e == ubi->move_from) { // NULL == NULL gets true
goto retry; // infinite loop !!!
$ top
PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND
7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0
Fix it by:
1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has
been removed from 'ubi->lookuptbl'.
2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an
use-after-free problem for wl entry in ubi_wl_put_peb().
Fetch a reproducer in [Link]. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Fix mmap_lock/disassociation_lock circular dependency
Commit 51976c6cd786 ("RDMA/core: Provide rdma_user_mmap_disassociate()
to disassociate mmap pages") introduced disassociation_lock to protect
new mmap registrations against uverbs_user_mmap_disassociate(), but
created an ABBA deadlock:
Thread A (mmap / fork):
mmap_lock -> disassociation_lock
Thread B (disassociate):
disassociation_lock -> mmap_lock
Fix by removing disassociation_lock entirely and using the pre-existing
hw_destroy_rwsem instead. hw_destroy_rwsem already provides the same
protection: rdma_umap_open() and ib_uverbs_mmap() both use
down_read_trylock() before registering a new VMA, so holding hw_destroy_rwsem
in uverbs_user_mmap_disassociate() is sufficient to block new registrations.
trylock is used in both mmap paths (not blocking down_read) because
mmap_lock is already held on entry, and uverbs_user_mmap_disassociate()
acquires mmap_lock internally — a blocking read would recreate the same
deadlock.
The only caller that was not taking hw_destroy_rwsem for write was
rdma_user_mmap_disassociate(). Fix it to take the rwsem per-ufile while
iterating under lists_mutex. This is safe because ib_uverbs_close()
releases hw_destroy_rwsem entirely before acquiring lists_mutex, so the
two locks are never held simultaneously.
lockdep warning:
[ 776.654252] ======================================================
[ 776.655214] WARNING: possible circular locking dependency detected
[ 776.656167] 6.18.0for-upstream_debug_94e244d9ccab #1 Not tainted
[ 776.657114] ------------------------------------------------------
[ 776.658087] devlink/14824 is trying to acquire lock:
[ 776.658879] ffff88811170c800 (&mm->mmap_lock){++++}-{4:4}, at: uverbs_user_mmap_disassociate+0x168/0x780 [ib_uverbs]
[ 776.660479]
[ 776.660479] but task is already holding lock:
[ 776.661460] ffff888142d92b08 (&file->disassociation_lock){+.+.}-{4:4}, at: uverbs_user_mmap_disassociate+0x39/0x780 [ib_uverbs]
[ 776.663177]
[ 776.663177] which lock already depends on the new lock.
[ 776.663177]
[ 776.664525]
[ 776.664525] the existing dependency chain (in reverse order) is:
[ 776.665724]
[ 776.665724] -> #2 (&file->disassociation_lock){+.+.}-{4:4}:
[ 776.666887] __mutex_lock+0x16d/0x2330
[ 776.667633] rdma_umap_open+0x129/0x280 [ib_uverbs]
[ 776.668489] dup_mmap+0xa40/0x1790
[ 776.669170] copy_process+0x5dd2/0x6170
[ 776.669933] kernel_clone+0xb6/0x610
[ 776.670636] __do_sys_clone+0xb5/0xf0
[ 776.671354] do_syscall_64+0x70/0x12e0
[ 776.672083] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 776.672940]
[ 776.672940] -> #1 (&mm->mmap_lock/1){+.+.}-{4:4}:
[ 776.673985] down_write_nested+0x90/0x1e0
[ 776.674751] dup_mmap+0x201/0x1790
[ 776.675448] copy_process+0x5dd2/0x6170
[ 776.676180] kernel_clone+0xb6/0x610
[ 776.676904] __do_sys_clone+0xb5/0xf0
[ 776.677615] do_syscall_64+0x70/0x12e0
[ 776.678351] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 776.679239]
[ 776.679239] -> #0 (&mm->mmap_lock){++++}-{4:4}:
[ 776.680253] __lock_acquire+0x18c6/0x2ec0
[ 776.681018] lock_acquire+0x10e/0x2e0
[ 776.681742] down_read+0x95/0x430
[ 776.682395] uverbs_user_mmap_disassociate+0x168/0x780 [ib_uverbs]
[ 776.683436] uverbs_destroy_ufile_hw+0x1ae/0x270 [ib_uverbs]
[ 776.684416] ib_uverbs_remove_one+0x22b/0x420 [ib_uverbs]
[ 776.685371] remove_client_context+0xa6/0xf0 [ib_core]
[ 776.686342] disable_device+0x12b/0x240 [ib_core]
[ 776.687249] __ib_unregister_device+0x269/0x460 [ib_core]
[ 776.688233] ib_unregister_device+0x21/0x30 [ib_core]
[ 776.689140] mlx5r_remove+0xd0/0x170 [mlx5_ib]
[ 776.689999] device_release_driver_internal+0x3b2/0x5
---truncated--- |
