| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds Read vulnerability in the Guththila XML parser wrapper of Apache Axis2/C. On some malformed XML input the Guththila parser returned a raw input byte in place of an event code, and the AXIOM reader wrapper used that value as an index into a ten-entry lookup table without checking its range, reading heap memory past the end of the table. An unauthenticated client could trigger this by sending a crafted XML request to a server built with Guththila, the default parser, causing the request to be parsed incorrectly or, in some cases, the process to crash. The memory read is not returned to the client. This issue affects Apache Axis2/C: through 2.0.0. The fix is available in commits 23110287924e79d05a5b4712298c355d1f05c606 and f01683ec10e8fddb87279ec9351b3239021223e6 and will be included in the next release. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching. |
| Joomla Extension - jdownloads.com - IDOR allowing restricted file downloads in jDownloads < 4.1.8 - The `other_file_id` parameter could reference another download’s file without fully enforcing the target download’s access restrictions. This allowed files to be delivered to users who were not authorised to access the target download. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek: Fix IRQ domain leak when port fails to enable
When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port
from pcie->ports and frees the port structure. However, the IRQ domains set
up earlier by mtk_pcie_init_irq_domain() are never freed.
Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper,
mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when
mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in
the probe error path (during resume, child devices may have active MSI
mappings and the NOIRQ context prohibits sleeping locks),
mtk_pcie_enable_port() is changed to return an error code so callers can
distinguish the two paths and act accordingly.
This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC
support series. |
| Joomla Extension - jdownloads.com - Authenticated path traversal in jDownloads < 4.1.8 - A manipulated `update_file` form parameter could bypass the intended server-file selection restrictions and move files from outside the permitted selection directory or assign them to a download. This could expose file contents and remove source files from their original locations. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: Remove device debugfs before releasing devres
VFIO device debugfs files created with debugfs_create_devm_seqfile()
store a devres allocated debugfs_devm_entry as inode private data.
vfio_unregister_group_dev() currently calls vfio_device_del() before
vfio_device_debugfs_exit(), but device_del() releases devres. This can
leave debugfs entries visible with stale inode private data while
unregister waits for userspace references to drain.
Remove the per-device debugfs tree before vfio_device_del(). The debugfs
view is diagnostic only, so losing it at the start of unregister is
preferable to preserving entries whose backing storage may already have
been released.
Complete the teardown by clearing the per-device debugfs root after
removal. This matches the global debugfs root cleanup and prevents
future users from mistaking a removed dentry for a live debugfs tree
during the remainder of unregister. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/mlx5: Fix racy bitfields and tighten struct layout
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.
This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.
Note mlx5_vhca_page_tracker.status is relocated to fill the alignment
hole this split exposes.
Bitfield justifications:
migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe
chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe
mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe
Dedicated storage units:
mdev_detach: written in the VF attach/detach event notifier
mlx5fv_vf_event() at runtime
log_active: written in mlx5vf_start_page_tracker()/
mlx5vf_stop_page_tracker() during runtime dirty tracking
deferred_reset: written in mlx5vf_state_mutex_unlock()/
mlx5vf_pci_aer_reset_done() during runtime reset handling
is_err: set by tracker error handling and dirty-log polling at runtime
object_changed: set by tracker event handling and cleared by dirty-log
polling at runtime |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF in binder_thread_release()
When a thread exits, binder_thread_release() walks its transaction stack
to clear the t->from and t->to_proc that correspond with the exiting
thread. However, a process dying in parallel might attempt to kfree some
of these transactions. And if one of them has no associated t->to_proc,
the t->to_proc->inner_lock will not be acquired.
This means that transaction accesses in binder_thread_release() after
t->to_proc has been cleared might race with binder_free_transaction()
and cause a use-after-free error as reported by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798
Write of size 8 at addr ffff000016627500 by task X/715
CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_thread_release+0x5d0/0x798
binder_ioctl+0x12c0/0x299c
[...]
Allocated by task 717 on cpu 18 at 67.267803s:
__kasan_kmalloc+0xa0/0xbc
__kmalloc_cache_noprof+0x174/0x444
binder_transaction+0x554/0x8150
binder_thread_write+0xa30/0x4354
binder_ioctl+0x20f0/0x299c
[...]
Freed by task 202 on cpu 18 at 90.416221s:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_free_transaction+0x150/0x294
binder_send_failed_reply+0x398/0x6d8
binder_release_work+0x3e4/0x4ec
binder_deferred_func+0xbd8/0x104c
[...]
==================================================================
In order to avoid this, make sure that binder_free_transaction() reads
the t->to_proc under the transaction lock. This will serialize the
transaction release with the accesses in binder_thread_release(). Plus,
it matches the documented locking rules for @to_proc. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF in binder_free_transaction()
In binder_free_transaction(), the t->to_proc is read under the t->lock.
However, once the t->lock is dropped, the to_proc can die in parallel.
This leads to a use-after-free error when we attempt to acquire its
inner lock right afterwards:
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0
Write of size 4 at addr ffff00001125da70 by task B/672
CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x1a0
binder_free_transaction+0x8c/0x320
binder_send_failed_reply+0x21c/0x2f8
binder_thread_release+0x488/0x7e0
binder_ioctl+0x12c0/0x29a0
[...]
Allocated by task 675:
__kmalloc_cache_noprof+0x174/0x444
binder_open+0x118/0xb70
do_dentry_open+0x374/0x1040
vfs_open+0x58/0x3bc
[...]
Freed by task 212:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_proc_dec_tmpref+0x32c/0x5e0
binder_deferred_func+0xc48/0x104c
process_one_work+0x53c/0xbc0
[...]
==================================================================
To prevent this, pin the target thread (t->to_thread) to guarantee the
target process remains alive. Undelivered transactions without a target
thread are already safe, as the target process can only be the current
context in those paths. |
| Uncontrolled resource consumption in Windows Remote Procedure Call allows an unauthorized attacker to deny service over a network. |
| Use after free in Windows Filter Manager allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Remote Desktop Client allows an unauthorized attacker to disclose information over a network. |
| Out-of-bounds read in Remote Desktop Client allows an unauthorized attacker to disclose information over a network. |
| Heap-based buffer overflow in Microsoft Trace Data Helper allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code over a network. |
| Joomla Extension - jdownloads.com - RCE through file upload in jDownloads < 4.1.8 - Insufficient validation of frontend thumbnail uploads allowed users with upload permission to place executable files on the server. This results in PHP code execution. |
| Joomla Extension - jdownloads.com - Publishing of files without approval in jDownloads < 4.1.8 - Manipulated frontend submission parameters could bypass the intended publication and ownership rules. In particular, submissions could be published despite automatic publication being disabled, and ownership could be assigned contrary to the intended policy. |
| Joomla Extension - jdownloads.com - SSRF via external download URL field jDownloads < 4.1.8 - HTTP redirects when retrieving external download URLs could bypass validation of the original destination. This allowed server-side requests to internal or otherwise prohibited destinations and disclosure of their responses (SSRF). |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Latch disable_idle_d3 per device
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: clear freeze listener on node removal
Generally userspace is supposed to explicitly clear freeze listeners
before they drop the refcount on the node ref to zero, but there's
nothing forcing that. Currently, in this scenario the freeze listener
remains in the freeze_listeners rbtree and in the remote node's freeze
listener list, even though the ref for which the listener is registered
is gone. This could potentially lead to a memory leak due to a refcount
cycle. Thus, remove the freeze listener in this scenario. |