| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Input validation leads to XSS or Cross-site Scripting vulnerability in OpenText Advanced Authentication. This issue affects Advanced Authentication versions before 6.5. |
| Clinic Image System developed by Changing contains hard-coded Credentials, allowing unauthenticated remote attackers to log into the system using administrator credentials embedded in the source code. |
| The Windows service configuration of ABP and AES contains an unquoted ImagePath registry value vulnerability. This allows a local attacker to execute arbitrary code by placing a malicious executable in a predictable location such as C:\Program.exe. If the service runs with elevated privileges, exploitation results in privilege escalation to SYSTEM level. This vulnerability arises from an unquoted service path affecting systems where the executable resides in a path containing spaces.
Affected products and versions include: ABP 2.0.7.6130 and earlier as well as AES 1.0.6.6133 and earlier. |
| A vulnerability was identified in TRENDnet TI-G160i, TI-PG102i and TPL-430AP up to 20250724. This affects an unknown part of the component SSH Service. The manipulation leads to use of default credentials. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor explains: "For product TI-PG102i and TI-G160i, by default, the product's remote management options are all disabled. The root account is for troubleshooting purpose and the password is encrypted. However, we will remove the root account from the next firmware release. For product TPL-430AP, the initial setup process requires user to set the password for the management GUI. Once that was done, the default password will be invalid." |
| A vulnerability was found in Belkin F9K1009 and F9K1010 2.00.04/2.00.09 and classified as critical. Affected by this issue is some unknown functionality of the component Web Interface. The manipulation leads to hard-coded credentials. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). The affected systems use symmetric cryptography with a hard-coded key to protect the communication between client and server. This could allow an unauthenticated remote attacker to compromise confidentiality and integrity of the communication and, subsequently, availability of the system.
A successful exploit requires the attacker to gain knowledge of the hard-coded key and to be able to intercept the communication between client and server on the network. |
| serverless-dns is a RethinkDNS resolver that deploys to Cloudflare Workers, Deno Deploy, Fastly, and Fly.io. Versions through abd including 0.1.30 have a vulnerability where the pr.yml GitHub Action interpolates in an unsafe manner untrusted input, specifically the github.event.pull_request.head.repo.clone_url and github.head_ref, to a command in the runner. Due to the action using the pull_request_target trigger it has permissive permissions by default. An unauthorized attacker can exploit this vulnerability to push arbitrary data to the repository. The subsequent impact on the end-user is executing the attackers' code when running serverless-dns. This is fixed in commit c5537dd, and expected to be released in 0.1.31. |
| A SQLi vulnerability in Komento component 4.0.0-4.0.7for Joomla was discovered. The issue allows unprivileged users to execute arbitrary SQL commands. |
| PCL (Plain Craft Launcher) Community Edition is a Minecraft launcher. In PCL CE versions 2.12.0-beta.5 to 2.12.0-beta.9, the login credentials used during the third-party login process are accidentally recorded in the local log file. Although the log file is not automatically uploaded or shared, if the user manually sends the log file, there is a risk of leakage. This is fixed in version 2.12.0-beta.10. |
| aws-mcp-server MCP server is vulnerable to command injection. An attacker can craft a prompt that once accessed by the MCP client will run arbitrary commands on the host system. |
| A stored XSS vulnerability in CommentBox component 1.0.0-1.1.0 for Joomla was discovered. |
| A stored XSS vulnerability in No Boss Testimonials component 1.0.0-3.0.0 and 4.0.0-4.0.2 for Joomla was discovered. |
| The affected product does not limit the number of attempts for inputting
the correct PIN for a registered product, which may allow an attacker
to gain unauthorized access using brute-force methods if they possess a
valid device serial number. The API provides clear feedback when the
correct PIN is entered. This vulnerability was patched in a server-side
update on April 6, 2025. |
| osCommerce versions up to and including 2.2 RC2a contain a vulnerability in its administrative file manager utility (admin/file_manager.php). The interface allows file uploads and edits without sufficient input validation or access control. An unauthenticated attacker can craft a POST request to upload a .php file containing arbitrary code, which is then executed by the server. |
| Certain modem models developed by Askey has a Stack-based Buffer Overflow vulnerability, allowing unauthenticated remote attackers to control the program's execution flow and potentially execute arbitrary code. |
| A vulnerability has been identified in Energy Services (All versions with G5DFR). Affected solutions using G5DFR contain default credentials. This could allow an attacker to gain control of G5DFR component and tamper with outputs from the device. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Newtec/iDirect NTC2218, NTC2250, NTC2299 on Linux, PowerPC, ARM allows Local Code Inclusion.This issue affects NTC2218, NTC2250, NTC2299: from 1.0.1.1 through 2.2.6.19.
The `commit_multicast` page used to configure multicasts in the modem's web administration interface uses improperly parses incoming data from the request before passing it to an `eval` statement in a bash script. This allows attackers to inject arbitrary shell commands. |
| A critical OS Command Injection vulnerability has been identified in the FAST LTA Silent Brick WebUI, allowing remote attackers to execute arbitrary operating system commands via specially crafted input. This vulnerability arises due to improper handling of untrusted input, which is passed directly to system-level commands without adequate sanitization or validation. Successful exploitation could allow attackers to execute arbitrary commands on the affected system, potentially resulting in unauthorized access, data leakage, or full system compromise. Affected WebUI parameters are "hd" and "pi". |
| # Active Storage allowed transformation methods potentially unsafe
Active Storage attempts to prevent the use of potentially unsafe image
transformation methods and parameters by default.
The default allowed list contains three methods allow for the circumvention
of the safe defaults which enables potential command injection
vulnerabilities in cases where arbitrary user supplied input is accepted as
valid transformation methods or parameters.
Impact
------
This vulnerability impacts applications that use Active Storage with the image_processing processing gem in addition to mini_magick as the image processor.
Vulnerable code will look something similar to this:
```
<%= image_tag blob.variant(params[:t] => params[:v]) %>
```
Where the transformation method or its arguments are untrusted arbitrary input.
All users running an affected release should either upgrade or use one of the workarounds immediately.
Workarounds
-----------
Consuming user supplied input for image transformation methods or their parameters is unsupported behavior and should be considered dangerous.
Strict validation of user supplied methods and parameters should be performed
as well as having a strong [ImageMagick security
policy](https://imagemagick.org/script/security-policy.php) deployed.
Credits
-------
Thank you [lio346](https://hackerone.com/lio346) for reporting this! |
| xml-crypto is an XML digital signature and encryption library for Node.js. An attacker may be able to exploit a vulnerability in versions prior to 6.0.1, 3.2.1, and 2.1.6 to bypass authentication or authorization mechanisms in systems that rely on xml-crypto for verifying signed XML documents. The vulnerability allows an attacker to modify a valid signed XML message in a way that still passes signature verification checks. For example, it could be used to alter critical identity or access control attributes, enabling an attacker to escalate privileges or impersonate another user. Users of versions 6.0.0 and prior should upgrade to version 6.0.1 to receive a fix. Those who are still using v2.x or v3.x should upgrade to patched versions 2.1.6 or 3.2.1, respectively. |
