| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Overlay Filter allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: lock sk in iso_connect_ind
Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the
"ev3" part of iso_connect_ind. It may also be NULL if socket has
transitioned away from the LISTEN/CONNECT states before locking.
Fix by adding lock/release. Recheck hcon is valid after lock acquire
where needed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix UAF when sending a message
In afs_make_call(), there's a race with async call reception and
destruction. If a call is dispatched that doesn't have call->write_iter
set (used to specify the data content for FS.StoreData), then the first
rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr.
Once rxrpc_send_data() queues the last request packet, the response could
come in at any time and cause the call to be completed and put. However,
afs_make_call() will look at the call again to see it ->write_iter should
be handled - something it's only allowed to do if it has its own ref on the
call. Whilst this is the case for synchronous calls, it isn't true for
async calls such as FS.FetchData.
There's also a potential UAF in afs_make_call() in the event that an
asynchronous call is being sent, but the call fails in some way (e.g. it
gets aborted from the server). The problem there is that afs_make_call()
tries to abort a call if the rxrpc send fails, but the asynchronous
notification from rxrpc may have caused the afs_call to be torn down.
generic/650 plays games with randomly taking CPUs offline, and can
interject a significant delay such that the call is deallocated before
afs_make_call() gets to check call->write_iter - and a UAF ensues (caught
by KASAN).
BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs]
Read of size 8 at addr ffff888035e050e8 by task fsstress/1409
Fix this by making afs_make_op_call() give the op->call its own ref rather
than transferring the caller's ref to it and then dropping the ref when
afs_make_call() returns.
This also means that the afs_make_call() func never loses its ref on the
call now. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Drain pending requests at net namespace exit
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request. |
| Improper privilege management in Windows Installer allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix subbuf resize races with trace_pipe_raw readers
Concurrent subbuffer resizes may crash trace_pipe_raw readers or leak
uninitialized memory to userspace due to stale size values.
Modify ring_buffer_alloc_read_page() to handle the resizing of an
existing buffer_data_read_page if necessary and add a new
ring_buffer_read_page_size(). This new function enables ring-buffer
buffer_data_read_page users to not call the racy
ring_buffer_subbuf_size_get(). This makes the spare_size member of
ftrace_buffer_info redundant.
Finally, handle buffer_data_read_page/reader_page order discrepancy in
ring_buffer_read_page(). On a mismatch simply copy manually the data to
the buffer_data_read_page. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Prevent drain_pebs() reentry
The PEBS buffer is shared by all events on a CPU, so drain_pebs() must
not be reentered. If so, one instance may observe stale buffer state and
potentially access out-of-bound memory.
Most invocations happen in NMI context, which naturally prevents reentry.
However, drain_pebs() is also reachable from process context via
intel_pmu_drain_pebs_buffer().
In those paths, the PMU is often already disabled, but not guaranteed.
For example, __intel_pmu_pebs_disable() only disables the target counter,
so other active counters can still raise a PMI and interrupt an in-flight
drain_pebs(). Here is an example,
__perf_addr_filters_adjust()
perf_event_stop()
__perf_event_stop()
x86_pmu_stop() (event->pmu->stop)
intel_pmu_disable_event()
intel_pmu_pebs_disable()
__intel_pmu_pebs_disable()
intel_pmu_drain_large_pebs()
intel_pmu_drain_pebs_buffer()
Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and
use them in intel_pmu_drain_large_pebs() to disable the full PMU
around the intel_pmu_drain_pebs_buffer() call, preventing reentry.
Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is
not disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate firmware log buffer metadata
The tracing log headers parsed by fw_log_print_buffer() reside in
DMA-shared BOs that the NPU firmware can write to.
fw_log_from_bo() validated log->header_size and log->size, but
fw_log_print_buffer() re-read those same fields from shared memory
afterwards, allowing a TOCTOU where firmware changes them between the
check and the use, and making the host dereference out-of-bounds
addresses while printing logs.
Snapshot the validated values once with READ_ONCE() and pass them down
explicitly in a new struct ivpu_fw_log_desc instead of re-reading them
from the shared struct. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock
The fcport->unsol_ctx_head list is modified from several contexts without
a common lock. Entries are added in qla2xxx_process_purls_iocb() from the
response queue ISR (under the qpair qp_lock), while they are removed from
qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp()
(NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB
completion). The qpair qp_lock cannot serialize this per-fcport list since
multiqueue adapters add entries through different qpairs, so a concurrent
add and delete (or two concurrent deletes) can corrupt the list pointers.
Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in
qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del()
on unsol_ctx_head. The add nests under the existing qp_lock; no delete path
takes qp_lock, so the lock order is consistent and deadlock free. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: convert nfsd_net boolean flags to unsigned long flags word
nfsd_net contains several boolean fields that are accessed from
concurrent contexts without serialization. In particular,
nfsd4_end_grace() guards its drain path with a plain bool:
if (nn->grace_ended)
return;
nn->grace_ended = true;
The read and the write are independent, and nothing in struct
nfsd_net serializes them. At least two contexts can reach this
code with no lock held:
laundromat path
laundry_wq kworker
nfs4_laundromat()
nfsd4_end_grace()
RECLAIM_COMPLETE path
nfsd compound kthread
nfsd4_reclaim_complete()
inc_reclaim_complete()
nfsd4_end_grace()
Both callers can observe grace_ended == false on different CPUs,
both store true, and both proceed into nfsd4_record_grace_done(),
which invokes the active client_tracking_ops->grace_done callback.
For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops
via nfsd4_recdir_purge_old, and the cld v1+ ops via
nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(),
which walks every bucket of reclaim_str_hashtbl with no lock and
calls nfs4_remove_reclaim_record() (list_del + kfree) on each
entry. Two concurrent walkers corrupt the list and double-free
every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client()
iterating the same bucket reads through freed memory.
A third call site exists in nfs4_state_start_net() on the
skip_grace startup path, but it runs under nfsd_mutex before any
client has connected and before the laundromat's first delayed
work fires, so it cannot race with the two callers above.
Replace the scattered boolean fields in nfsd_net with a single
unsigned long flags word and an enum nfsd_net_flag for the bit
positions. The grace_ended race is fixed by using
test_and_set_bit(), which is atomic on all architectures. The
remaining flags (grace_end_forced, in_grace, somebody_reclaimed,
track_reclaim_completes, nfsd_net_up, lockd_up) are converted to
use test_bit/set_bit/clear_bit for consistency. This avoids
sub-word cmpxchg issues on architectures like Hexagon that only
support word-sized atomic operations. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_owner: use memcg_data snapshot to avoid TOCTOU in print_page_owner_memcg()
print_page_owner_memcg() reads page->memcg_data via READ_ONCE() at the
start to guard against tail pages and NULL data. However, it later
re-reads page->memcg_data locklessly in two places:
1: page_memcg_check(page)
2: PageMemcgKmem(page) (via folio_memcg_kmem(), which includes
VM_BUG_ON assertions for tail pages and MEMCG_DATA_OBJEXTS)
If the page is concurrently freed and reallocated as a THP tail page or
slab page between these calls, the VM_BUG_ON assertions can trigger on
CONFIG_DEBUG_VM=y builds, crashing the kernel.
Fix both TOCTOU issues by using the memcg_data snapshot throughout. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: hold dev->mt76.mutex while disabling tx worker in SER
mt7996_mac_reset_work() parked the tx worker and disabled the RX/TX NAPIs
before taking dev->mt76.mutex. mt76_worker_disable()/_enable() are plain
kthread park/unpark, not refcounted, and __mt76_set_channel() toggles the
same worker and the MT76_RESET bit under the mutex. An L1 SER racing a
channel switch could therefore have the worker unparked and MT76_RESET
cleared while the reset path resets the DMA rings, corrupting descriptors
or tokens. Take the mutex before disabling the worker, as mt7915 does. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables
vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each()
and dereferences the returned struct vgic_irq in the loop body without
holding a reference on the LPI.
The xarray iterator only provides temporary RCU coverage while looking up
the current entry. That is not sufficient for this loop body, which reads
fields from struct vgic_irq and performs guest memory accesses before the
iteration completes.
A concurrent path can trigger this race: the irqfd cached injection path
(vgic_its_inject_cached_translation) obtains a transient LPI reference
via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex,
config_lock, or its_lock. If guest ITS DISCARD then drops the cache and
ITE references under its_lock, the transient inject reference may become
the final one. When vgic_put_irq() drops it, the LPI is erased from
lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables()
may still hold a stale pointer obtained from the xarray iterator and
dereference it after the RCU grace period completes.
Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes
a stable reference, and dropping it with vgic_put_irq() on all paths.
This matches the pattern already used by other lpi_xa iterators in the
vgic ITS code. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Use children field for rcu head and add memory barriers
When an eventfs inode is freed, it sets ei->is_freed and then uses its
ei->list to add it to the srcu link list as the list field is a union with
the rcu list head. As the ei->list is used to iterate over an SRCU
protected list without taking the eventfs_mutex, there's nothing stopping
the iteration over that list to see the ei->rcu instead of the ei->list
and it will read a corrupt target.
To fix this, change the union of the rcu list head with the children list.
On freeing the eventfs inode, set the is_free and execute a smp_wmb()
before adding the eventfs inode to the SRCU list.
On iteration of the ei->children list, at the start, execute a smp_rmb()
and then read the is_freed of the ei to see if the children list is still
valid. If is_freed is set, then the ei_child read is not valid and the
loop should exit immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
(cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Block region delete during region creation
Expand the range lock, rename it "regions_lock", to disable region deletion
in the critical period between construct_region() and attach_target(), as
well as the period between device_add() and registering the remove actions.
Otherwise, userspace can confuse the kernel. It can violate the assumption
the region stays registered through the completion of cxl_add_to_region().
It can violate the assumption that devm_add_action_or_reset() is working
with a live 'struct cxl_region'.
It is ok for the region to disappear outside of those windows as that
mirrors device hotplug flows where the proper locks are held. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Resolve region deletion races
Sungwoo noticed that the sysfs trigger to delete a region may try to delete
a region multiple times. It also has no exclusion relative to the kernel
releasing the region via CXL root device teardown.
Instead of installing new cxl root devres actions per region, use the
existing root decoder unregistration event to remove all remaining regions.
An xarray of regions replaces a devres list of regions.
This handles 3 separate issues with the old approach:
1/ sysfs users racing to delete the same region: no longer possible now
that the regions_lock is held over the lookup and deletion.
2/ multiple actions triggering deletion of the same region: solved by
erasing regions while holding @regions_lock, and only proceeding on
successful erasure.
3/ userspace racing devres_release_all() to trigger the devres not found
warning: solved by sysfs unregistration not requiring a release action |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
Blamed commit moved the TIME_WAIT-derived ISN from the skb control
block to a per-CPU variable, assuming the value would always be consumed
by tcp_conn_request() for the same packet that wrote it. That assumption
is violated by multiple drop paths between the producer
(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer
(tcp_conn_request()):
- min_ttl / min_hopcount check
- xfrm policy check
- tcp_inbound_hash() MD5/AO mismatch
- tcp_filter() eBPF/SO_ATTACH_FILTER drop
- th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN
- psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv()
- tcp_checksum_complete() in tcp_v{4,6}_do_rcv()
- tcp_v{4,6}_cookie_check() returning NULL
When a packet is dropped on any of these paths, tcp_tw_isn is left set.
The next SYN processed on the same CPU then consumes the non zero value in
tcp_conn_request(), receiving a potentially predictable ISN.
This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu
variable.
Note that tcp_v{4,6}_fill_cb() do not set it.
Very litle impact on overall code size/complexity:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
tcp_v6_rcv 3038 3042 +4
tcp_v4_rcv 3035 3039 +4
tcp_conn_request 2938 2923 -15
Total: Before=24436060, After=24436053, chg -0.00% |
