| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Deleting a label compared the ID of the repository in the request against the organization ID of organization labels, and the two ID sequences overlap. A user with write access to the issues of a repository could therefore delete the labels of an organization that has the same numeric ID as that repository. Labels are now deleted only within their own repository or organization. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which
drops and reacquires the socket lock. Its error path tries to decide
whether msg_tx names the local temporary message by comparing it with
the current value of psock->cork.
This comparison is unsafe when two threads send on the same socket:
Thread A Thread B
msg_tx = psock->cork
sk_msg_alloc() fails
sk_stream_wait_memory()
releases the socket lock acquires the socket lock
completes the cork
psock->cork = NULL
frees the cork
reacquires the socket lock
msg_tx != psock->cork
sk_msg_free(msg_tx)
The stale cork is therefore mistaken for the local temporary message
and freed again. KASAN reported:
BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50
Read of size 4 at addr ffff88810c908800 by task poc/90
Call Trace:
sk_msg_free+0x49/0x50
tcp_bpf_sendmsg+0x14f5/0x1cc0
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 89:
__kasan_kmalloc+0x8f/0xa0
tcp_bpf_sendmsg+0x16b3/0x1cc0
Freed by task 91:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
tcp_bpf_sendmsg+0xec3/0x1cc0
msg_tx can only name the stack-local tmp or the shared cork. Check for
tmp directly so a changed psock->cork cannot turn a shared message into
an apparent local one. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Hold a dma-buf reference for imported BOs
An imported dma-buf BO is created as a ttm_bo_type_sg BO whose
reservation object is the exporter's dma_buf->resv. The importer,
however, only takes a dma-buf reference after a successful
dma_buf_dynamic_attach(). Until then nothing keeps the exporter alive,
so if the exporter is freed while the BO still references its resv, a
later access to that resv is a use-after-free:
Oops: general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b9c
Workqueue: ttm ttm_bo_delayed_delete [ttm]
RIP: 0010:mutex_can_spin_on_owner+0x3f/0xc0
This can be reached on two paths:
- dma_buf_dynamic_attach() fails, or
- ttm_bo_init_reserved() fails during BO creation.
In both cases the BO already has bo->base.resv pointing at the exporter
resv, and sg BOs are always torn down via ttm_bo_delayed_delete(), which
locks bo->base.resv asynchronously - potentially after the exporter has
been freed.
Take the dma-buf reference in xe_bo_init_locked(), before
ttm_bo_init_reserved(), so it also covers a creation failure there, and
release it in xe_ttm_bo_destroy(). The reference is held for the whole
BO lifetime, keeping the shared resv alive on every path.
v2:
- Reworked the fix to avoid creating the imported sg BO before
dma_buf_dynamic_attach() succeeds.
- Attach with importer_priv == NULL and make invalidate_mappings ignore
incomplete imports.
v3:
- Dropped the xe-side reordering approach since importer_priv must be
valid when dma_buf_dynamic_attach() publishes the attachment.
- Per Christian's suggestion on the v1 thread, keyed the check on
import_attach rather than removing the sg guard entirely.
- Fixes both xe and amdgpu in a single TTM patch.
v4:
- Moved import_attach check to after dma_resv_copy_fences() so fences
are copied before returning for successful imports (Thomas).
- Removed exporter-alive claim from commit message (Thomas).
v5:
- Add drm/xe patch to keep imported sg BOs off the LRU before attach
succeeds; the TTM fix alone is not sufficient for xe if the BO is
already LRU-visible. (Thomas)
v4 patch:
https://patchwork.freedesktop.org/patch/736663/?series=169129&rev=2
- Patch 1 (drm/ttm) carries Christian's Reviewed-by from v4.
v6:
- Reworked the fix based on Thomas' suggestion. Instead of the TTM resv
individualization (v1-v5) plus the xe off-LRU/placement handling (v5),
just hold a dma-buf reference for the imported BO lifetime so the
shared resv can never be freed while the BO still references it.
Single xe patch, no TTM change. (Thomas)
- Take the reference in xe_bo_init_locked() before ttm_bo_init_reserved()
so a TTM creation failure is covered too (Thomas).
- Dropped the v5 series (drm/ttm + drm/xe off-LRU); the off-LRU approach
also regressed in CI BAT via ttm_bo_pipeline_gutting() creating a ghost
BO that outlived the exporter.
Link to v5: https://patchwork.freedesktop.org/series/169984/
v7:
- Move changelog above --- so it stays in the commit message.
- Reorder changelog entries oldest-to-newest. (Thomas)
(cherry picked from commit 3516f3fae6be35642f8f06f8a218da6425c0306a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid()
The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only
valid while the lock is still being held. Once xa_unlock_irqrestore is
called and returned, the pointer is no longer under lock and is subject
to modification. Since, the caller still dereferences vm->task_info in
amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a
use after unlock problem.
Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid()
through removing the amdgpu_vm_get_vm_from_pasid() function from
amdgpu_vm.c and making the relevant code inline to hold the lock while
it is still in use.
(cherry picked from commit 9d01579f3f868b333acc901815972685989092c7) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: close a re-opened queue timer in the destructor
queue_delete() closes the queue timer, then frees it. snd_seq_timer_close()
clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and
snd_seq_timer_delete() frees q->timer.
A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT
that took a queueptr() use_lock reference before the queue was unlinked
runs snd_seq_timer_open() after the close. Open refuses re-open only while
timeri is set, and the close just cleared it, so it re-opens timeri.
snd_seq_timer_delete() does not close that instance. Its snd_seq_timer_stop()
is a no-op, because running was cleared first. So it frees q->timer with the
instance still live. The queue is freed next.
The instance stays on the global timer with callback_data pointing at the
freed queue. A non-owner START on the unlocked queue arms it. The next tick
derefs the freed queue in snd_seq_timer_interrupt().
Reachable by an unprivileged user with access to /dev/snd/seq. No CAP and
no queue ownership required.
Close any lingering instance in the destructor. There, ->timeri can no
longer change: the queue is unlinked and all use_lock borrowers have
drained, so no snd_seq_queue_use() can re-open it. Close it before clearing
q->timer. snd_timer_close() waits for any in-flight snd_seq_timer_interrupt()
to finish, and that callback still reads q->timer (via snd_seq_check_queue()),
so q->timer must stay valid until it drains. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: drain a slave's callback before its master detaches it
snd_timer_close_locked() drains the closing instance's own in-flight
callback (IFLG_CALLBACK) before freeing it, but not its slaves'. When a
master instance is closed, remove_slave_links() clears each slave's
->timer; the slave's own close then reads timer == NULL and takes the
branch that skips the drain entirely (snd_timer_stop_slave() also no-ops
on a NULL timer). So a slave whose callback is still running when the
master is closed is freed underneath the live callback, leading to
use-after-free.
Drain the slaves too before remove_slave_links() severs them.
snd_timer_stop() has already taken this instance off the active list, so
no new slave callback can be queued. Take the slaves off the ack list so
a pending one can't fire either, then wait for any that is already in
flight. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Protect UUID list traversal
The hci_sync conversion moved class-of-device and EIR generation from an
HCI request built under hdev->lock to asynchronous command sync work.
The worker holds hdev->req_lock, but that lock does not serialize access
to hdev->uuids against add_uuid() and remove_uuid(), which update the
list under hdev->lock.
The following interleaving can therefore occur:
CPU0 (command sync work) CPU1 (management socket)
fetch uuid from the list
list_del(&uuid->list)
kfree(uuid)
read uuid->size
KASAN reports the resulting use-after-free:
BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0
Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
eir_create+0xb8f/0xee0
hci_update_eir_sync+0x1c0/0x330
hci_cmd_sync_work+0x13c/0x290
process_one_work+0x63a/0x1070
worker_thread+0x45b/0xd10
Allocated by task 86:
__kasan_kmalloc+0x8f/0xa0
add_uuid+0x18a/0x4b0
hci_sock_sendmsg+0x1033/0x1ea0
Freed by task 92:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
remove_uuid+0x25e/0x560
hci_sock_sendmsg+0x1033/0x1ea0
Hold hdev->lock while generating and committing the class-of-device and
EIR snapshots. Release it before sending an HCI command, so controller
waits do not happen under the device lock. This protects all UUID list
walks in these paths and restores the serialization lost in the command
sync conversion. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: only unlock nsm_dev on post-lock error paths
nsm_dev_ioctl() jumps to the common out label even when the initial
copy_from_user() fails before nsm->lock has been taken. The error path
then blindly unlocks a mutex that was never acquired.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the miscdevice ioctl entry and the pre-lock
copy_from_user(&raw, argp, _IOC_SIZE(cmd)) failure path by issuing
NSM_IOCTL_RAW with an invalid user pointer. That failure reaches the
shared out label before mutex_lock(&nsm->lock). Lockdep reported:
WARNING: bad unlock balance detected!
exploit/193 is trying to release lock (&global_nsm.lock) at:
nsm_dev_ioctl+0x5f/0xcf [vuln_msv]
but there are no more locks to release!
no locks held by exploit/193.
Return immediately on the pre-lock copy_from_user() failure and keep the
common unlock label for the post-lock paths only. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: avoid auth_enable sysctl UAF during netns teardown
proc_sctp_do_auth() updates the SCTP control socket after changing
net.sctp.auth_enable. The handler gets the per-net SCTP state from
ctl->data, so an already opened sysctl file can still target a network
namespace while that namespace is being torn down.
SCTP previously registered its per-net sysctls from sctp_defaults_init(),
while the control socket is created later from sctp_ctrlsock_init(). This
exposed a window during initialization where auth_enable was writable
before net->sctp.ctl_sock existed, and a teardown window where auth_enable
stayed writable after inet_ctl_sock_destroy() had released the control
socket.
Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after
sctp_ctl_sock_init() succeeds, and unregister the sysctl table before
destroying the control socket in sctp_ctrlsock_exit(). If sysctl
registration fails after the control socket was created, destroy the
control socket in the same init path.
Make sctp_sysctl_net_unregister() tolerate a missing header and clear the
saved pointer so init-error and exit paths can safely share the unregister
helper. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: refresh auth->authorizer_buf{,_len} after authorizer update
ceph_x_create_authorizer() caches au->buf->vec.iov_base and
au->buf->vec.iov_len in struct ceph_auth_handshake. These
cached values are then used by the messenger connect code when
sending the authorizer.
ceph_x_update_authorizer() can rebuild the authorizer when a newer
service ticket is available. If the rebuilt authorizer no longer
fits in the existing buffer, ceph_x_build_authorizer() drops its
reference to au->buf and allocates a new one. If this is the final
reference, ceph_buffer_put() frees the old ceph_buffer and its
vec.iov_base, but auth->authorizer_buf still points at that freed
memory.
A subsequent msgr1 reconnect can therefore queue the stale pointer
and trigger a KASAN slab-use-after-free in _copy_from_iter() while
tcp_sendmsg() copies the authorizer.
Refresh auth->authorizer_buf and auth->authorizer_buf_len after a
successful authorizer rebuild so the messenger sends the current
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: remove debugfs files before client teardown
ceph_destroy_client() tears down the monitor client before removing
the per-client debugfs files. A concurrent read of the monmap debugfs
file can enter monmap_show() after ceph_monc_stop() has freed
monc->monmap, triggering a use-after-free.
Remove the debugfs files before stopping the OSD and monitor clients.
debugfs_remove() drains active handlers and prevents new accesses, so
the debugfs callbacks can no longer race the rest of client teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
phonet: pep: fix use-after-free in pep_get_sb()
pep_get_sb() doesn't consider that pskb_may_pull() might have relocated
the skb data, and continue to access the older pointer, causing UAF.
Reproduced under KASAN:
BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0
Read of size 1 at addr ff11000105510f50 by task repro/157
pep_get_sb+0x234/0x3b0
pipe_handler_do_rcv+0x5f7/0xa10
pep_do_rcv+0x203/0x410
__sk_receive_skb+0x471/0x4a0
phonet_rcv+0x5b3/0x6c0
__netif_receive_skb+0xcc/0x1d0
Refetch the header with skb_header_pointer() after pskb_may_pull(), so
the possibly stale pointer is no longer dereferenced. There are better
ways to solve this, but, this is the less instrusive one. |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns geneve->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in geneve->net can rewrite a geneve
device whose underlay lives in geneve->net.
geneve_changelink() applies the new configuration against geneve->net:
geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair
reopen the underlay sockets in that netns (geneve_sock_add() uses
geneve->net), so the same reasoning as the tunnel changelink series
applies here.
Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix use-after-free of a severed iucv_path
af_iucv queues not-yet-received message notifications on iucv->message_q,
each holding a raw pointer to the connection's iucv_path. When the peer
severs the connection, iucv_sever_path() frees that path with
iucv_path_free() but leaves the notifications queued. A later recvmsg()
drains message_q via iucv_process_message_q() and hands the stale path to
message_receive() -- a use-after-free of the freed iucv_path.
Drop the queued notifications when the path is severed; once the path is
gone they can no longer be received. This also frees the notifications
leaked when a socket is closed with messages still queued. |
| In the Linux kernel, the following vulnerability has been resolved:
ila: reload IPv6 header after pskb_may_pull in checksum adjust
ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling
pskb_may_pull(). On a non-linear skb whose transport header sits in a page
fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head()
and free the old skb head, leaving ip6h dangling; the following
get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator()
uses ip6h (and the iaddr derived from it) again after the csum-adjust
call and additionally writes the new locator through that pointer.
Impact: a remote IPv6 packet routed through a configured ILA
csum-adjust-transport route or receive-side mapping triggers a
slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or
mapping requires CAP_NET_ADMIN to configure, but trigger packets are
unauthenticated once it exists.
Reload ip6h after each pskb_may_pull() in ila_csum_adjust_transport()
before the csum-diff read. In ila_update_ipv6_locator() only the
ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in
that case alone before the destination-address write; the neutral-map
modes never pull and keep their cached pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
pppoe: reload header pointer after dev_hard_header()
pppoe_sendmsg() saves a pointer to the PPPoE header before calling
dev_hard_header(). Device header callbacks are allowed to reallocate the
skb head, invalidating pointers into it.
This can happen when a send is blocked in copy_from_user() while the first
non-Ethernet port is added to an empty team device. The team's delegated
GRE header callback then expands the skb head. PPPoE subsequently writes
six bytes through the stale pointer into the freed head.
Reload the PPPoE header through the skb's network-header offset after
device header creation. pskb_expand_head() updates that offset when it
relocates the head. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: clear sock->sk on the failed-insert path in tipc_sk_create()
When tipc_sk_create() fails to insert the new socket (tipc_sk_insert()
returns non-zero), its error path frees the sk with sk_free() but leaves
sock->sk pointing at the freed object:
if (tipc_sk_insert(tsk)) {
sk_free(sk);
pr_warn("Socket create failed; port number exhausted\n");
return -EINVAL;
}
This is harmless for plain socket(): the syscall layer clears sock->ops
before releasing, so tipc_release() is never called. It is not harmless
on the accept() path. tipc_accept() creates the pre-allocated child
socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves
new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then
fput()s the new file, so __sock_release() -> tipc_release() runs
lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the
sk_lock spinlock.
tipc_release() already guards this exact "failed accept() releases a
pre-allocated child" case with "if (sk == NULL) return 0;", but the
guard is bypassed because tipc_sk_create() left sock->sk non-NULL
(dangling) rather than NULL.
Clear sock->sk on the failed-insert path so the existing tipc_release()
NULL check fires and the use-after-free is avoided.
The tipc_sk_insert() failure is reached when the per-netns socket
rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M
elements) -- i.e. once a netns holds ~2M TIPC sockets every insert
returns -E2BIG.
BUG: KASAN: slab-use-after-free in lock_sock_nested (net/core/sock.c:3839)
Write of size 8 at addr ffff8880047cdc38 by task init/1
lock_sock_nested (net/core/sock.c:3839)
tipc_release (net/tipc/socket.c:638)
__sock_release (net/socket.c:710)
sock_close (net/socket.c:1501)
__fput (fs/file_table.c:512)
Allocated by task 1:
sk_alloc (net/core/sock.c:2308)
tipc_sk_create (net/tipc/socket.c:487)
tipc_accept (net/tipc/socket.c:2744)
do_accept (net/socket.c:2034)
Freed by task 1:
__sk_destruct (net/core/sock.c:2391)
tipc_sk_create (net/tipc/socket.c:504)
tipc_accept (net/tipc/socket.c:2744)
do_accept (net/socket.c:2034) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: invoke pm_genpd_remove() before freeing genpd
Call pm_genpd_remove() to unregister from global list prior to releasing
acp_genpd memory, and clear the pointer after free.
(cherry picked from commit cd8650d7a91ee8b768e202354672553faa5cc1f2) |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix recursive locking deadlock in audit_dupe_exe()
A deadlock occurs in the audit subsystem when duplicating
executable-related rules.
When a file is moved (e.g., via do_renameat2()), the VFS layer locks
the parent directory (I_MUTEX_PARENT), which synchronously triggers an
fsnotify_move event. If an existing executable audit rule matches the
file being moved, the audit subsystem catches this event and calls
audit_dupe_exe() to duplicate the watch and update the rule. Then,
audit_alloc_mark() would call kern_path_parent() to resolve the path,
leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock
already held by the task, resulting in the following recursive locking
deadlock:
============================================
WARNING: possible recursive locking detected
6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted
--------------------------------------------
mv/5099 is trying to acquire lock:
ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3},
at: __kern_path_locked+0x10a/0x2f0
but task is already holding lock:
ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3},
at: lock_two_directories+0x13f/0x2b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&inode->i_sb->s_type->i_mutex_dir_key/1);
lock(&inode->i_sb->s_type->i_mutex_dir_key/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by mv/5099:
#0: ffff888112a9c440 (sb_writers#13)
at: do_renameat2+0x34c/0xbc0
#1: ffff888112a9c790 (&type->s_vfs_rename_key#3)
at: do_renameat2+0x415/0xbc0
#2: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1)
at: lock_two_directories+0x13f/0x2b0
#3: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/5)
at: lock_two_directories+0x175/0x2b0
#4: ffffffffb3a1fb10 (&fsnotify_mark_srcu)
at: fsnotify+0x454/0x28a0
#5: ffffffffaf886230 (audit_filter_mutex)
at: audit_update_watch+0x36/0x11e0
stack backtrace:
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_deadlock_bug.cold+0xbd/0xca
validate_chain+0x83a/0xf00
__lock_acquire+0xcac/0x1d20
lock_acquire.part.0+0x11b/0x360
down_write_nested+0x9f/0x230
__kern_path_locked+0x10a/0x2f0
kern_path_locked+0x26/0x40
audit_alloc_mark+0xfb/0x4f0
audit_dupe_exe+0x6c/0xe0
audit_dupe_rule+0x6c2/0xc00
audit_update_watch+0x4cc/0x11e0
audit_watch_handle_event+0x12c/0x1b0
send_to_group+0x5d0/0x8b0
fsnotify+0x615/0x28a0
fsnotify_move+0x1d8/0x630
vfs_rename+0xdcd/0x1df0
do_renameat2+0x9d4/0xbc0
__x64_sys_renameat+0x192/0x260
do_syscall_64+0x92/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0491fe8c4e
Code: 0f 1f 40 00 48 8b 15 c1 e1 16 00 f7 d8 64 89 02 b8 ff ff ff ff
c3 66 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 08 01 00 00 0f 05 <48>
3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 89
RSP: 002b:00007ffc7210bf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000108
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0491fe8c4e
RDX: 0000000000000003 RSI: 00007ffc7210e6c8 RDI: 00000000ffffff9c
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: 00005575eb2dae2a R11: 0000000000000246 R12: 00005575eb2dae2a
R13: 00007ffc7210e6c8 R14: 0000000000000003 R15: 00000000ffffff9c
</TASK>
The aforementioned deadlock can be consistently reproduced by running
the script below:
audit-dupe-exe-deadlock.sh
--------------------------
#!/bin/bash
auditctl -D
mkdir -p /tmp/foo
touch /tmp/file
auditctl -a always,exit -F exe=/tmp/file -F path=/tmp/file -S all -k dr
mv /tmp/file /tmp/foo/file
rm -Rf /tmp/foo
This patch fixes the issue by introducing struct audit_watch_ctx to pass
the fsnotify event context down to audit_alloc_mark(). By utilizing the
already-resolved directory inode provided by the event, we bypass the
kern_path_parent() path resol
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix a use-after-free problem in rxe_mmap
rxe_mmap() removes a rxe_mmap_info struct from the pending_mmaps list
and releases pending_lock while the struct's kref is still at 1:
list_del_init(&ip->pending_mmaps);
spin_unlock_bh(&rxe->pending_lock); /* ref == 1, no lock held */
ret = remap_vmalloc_range(vma, ip->obj, 0); /* walks PTEs */
[...]
rxe_vma_open(vma); /* kref_get, ref → 2 */
remap_vmalloc_range_partial() walks PTEs without any lock.
A concurrent DESTROY_CQ ioctl on another CPU calls:
kref_put(&q->ip->ref, rxe_mmap_release) /* ref 1→0 */
vfree(ip->obj) /* clears vmalloc PTEs mid-walk */
kfree(ip) /* frees rxe_mmap_info */
This yields:
1. Kernel crash, vmalloc_to_page() returns NULL when vfree wins the
per-PTE race -> vm_insert_page(NULL) → GPF in validate_page_before_insert
2. Page UAF, vmalloc_to_page() reads a stale PTE before vfree clears
it. User VMA holds a PTE to a free'd page which might eventually get
reallocated later by vmalloc which allows the attacker to get a clean
page-level UAF.
It is worth noting that even though a page-level UAF is possible given
the strong primitive, it is statistically very difficult to achieve
given the very short time window (after the last insert_page and before
the kref_get).
The call trace are as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 UID: 1000 PID: 413 Comm: poc Not tainted 7.0.0-rc5-dirty #28 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:validate_page_before_insert+0x32/0x300
Code: e5 41 57 41 56 49 89 fe 41 55 41 54 53 48 89 f3 e8 93 b5 a3 ff 48 8d 7b 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 7b 02 00 00 4c 8b 63 08 31 ff 4d 89 e5 41 83 e5
RSP: 0018:ffff88811b15f2f0 EFLAGS: 00000202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008
RBP: ffff88811b15f318 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881181eee00
R13: 0000000000000000 R14: ffff8881181eee00 R15: ffff8881181eee20
FS: 00007b1e000f76c0(0000) GS:ffff8884268e0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007b1e00a24ac0 CR3: 0000000116eb3000 CR4: 00000000000006f0
Call Trace:
<TASK>
insert_page+0x8f/0x190
? __pfx_insert_page+0x10/0x10
? kasan_save_alloc_info+0x38/0x60
vm_insert_page+0x2e7/0x400
remap_vmalloc_range_partial+0x212/0x3e0
remap_vmalloc_range+0x6e/0xb0
? __kasan_check_write+0x14/0x30
rxe_mmap+0x2e9/0x5d0
ib_uverbs_mmap+0x1ad/0x2c0
__mmap_region+0x12c2/0x2ad0
? __pfx___mmap_region+0x10/0x10
? __sanitizer_cov_trace_switch+0x58/0xb0
? mas_prev_slot+0x360/0x39c0
? __sanitizer_cov_trace_switch+0x58/0xb0
? mas_next_slot+0x1e5b/0x2f40
? __sanitizer_cov_trace_cmp8+0x18/0x30
? unmapped_area_topdown+0x4dd/0x610
? kfree+0x1b1/0x440
? free_cpumask_var+0x16/0x30
? __kasan_slab_free+0x7d/0xa0
? __sanitizer_cov_trace_cmp8+0x18/0x30
mmap_region+0x2e6/0x3c0
do_mmap+0xa3e/0x12a0
? __pfx_do_mmap+0x10/0x10
? __kasan_check_write+0x14/0x30
? down_write_killable+0xba/0x160
? __pfx_down_write_killable+0x10/0x10
? __sanitizer_cov_trace_cmp4+0x16/0x30
vm_mmap_pgoff+0x2d4/0x4a0
? __pfx_vm_mmap_pgoff+0x10/0x10
? fget+0x1bf/0x270
ksys_mmap_pgoff+0x40c/0x690
? __sanitizer_cov_trace_const_cmp4+0x16/0x30
? __pfx_ksys_mmap_pgoff+0x10/0x10
? __kasan_check_write+0x14/0x30
? _raw_spin_trylock+0xbb/0x130
? __pfx__raw_spin_trylock+0x10/0x10
__x64_sys_mmap+0x135/0x1e0
x64_sys_c
---truncated--- |
