| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers.
Let's recompute nh pointer to make sure any change won't mess things up. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| Incorrect Authorization vulnerability in Drupal Webform allows Forceful Browsing. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| Incorrect Authorization vulnerability in Drupal Webform allows Forceful Browsing. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| Incorrect Authorization vulnerability in Drupal Webform allows Forceful Browsing. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| AMI APTIOV contains vulnerabilities
in BIOS where users may cause “Buffer Access with Incorrect Length
Value” by local access. Successful exploitation of this vulnerability could
lead to buffer overflows, memory corruption, and arbitrary code execution, and
also impact Confidentiality, Integrity, and Availability. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2
(which traps) or ZCR_EL1 (which does not trap). KVM handles both in
different way:
- on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own
VL limit. This has the potential to break existing SW that relies
on the full LEN field to be stateful.
- on ZCR_EL1 access, we do absolutely nothing.
On restoring the SVE context for an L2 guest, we directly restore the
guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the
guest's view of the register was updated using the ZCR_EL2 accessor,
the value has already been sanitised (with the caveat mentioned above).
But if the guest used ZCR_EL1, the raw value is written into the HW,
and the L2 guest can now access VLs that it shouldn't.
Fix all the above by moving the VL capping to the restore points,
ensuring that:
- the HW is always programmed with a capped value, irrespective of
the accessor being used,
- the ZCR_EL2.LEN field is always completely stateful, irrespective
of the accessor being used.
Additionally, move ZCR_EL2 to be a sanitised register, ensuring that
only the LEN field is actually stateful. This requires some creative
construction of the RES0 mask, as the sysreg generation script does
not yet generate RAZ/WI fields.
[maz: rewrote commit message, tidy up access_zcr_el2()] |
| FooSun DotNetCMS 1.0 and 2.0 contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate MSSQL queries through the CityId parameter. Attackers can send GET requests to /user/City_ajax.aspx with UNION SELECT payloads in CityId, concatenated unsanitized into the sys_City query, to extract database information. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-14. |
| Backstage is an open framework for building developer portals. Prior to 2.2.4, the @backstage/plugin-techdocs-backend package is affected by improper authorization enforcement for techdocs static content. An authenticated user with access to one TechDocs documentation site could craft a URL able to read documentation belonging to a different entity. This only affects deployments using the external TechDocs builder with an external storage provider (S3, GCS, etc.) and the permission framework enabled. Instances that do not use the permission framework are unaffected, since TechDocs content is visible to all authenticated users by design. This issue is fixed in version 2.2.4. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this. |
| Missing Authorization vulnerability in Drupal AI Translate allows Forceful Browsing. This issue affects AI Translate versions: from 0.0.0 to 1.3.2, from 1.4.0 to 1.4.1. |
| Missing Authorization vulnerability in Drupal AI (Artificial Intelligence) allows Forceful Browsing. This issue affects AI (Artificial Intelligence) versions: from 0.0.0 to 1.3.13, from 1.4.0 to 1.4.8. |
| Missing Authorization vulnerability in Drupal Advanced Search allows Forceful Browsing. This issue affects Advanced Search versions: from 0.0.0 to 2.4.5. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 NetFlow Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.
This vulnerability is due to incomplete error checking when Snort 3 parses UDP Netflow Protocol packets. An attacker could exploit this vulnerability by sending a single crafted Netflow packet through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a DoS condition. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in AmentoTech Workreap Core workreap_core allows Blind SQL Injection.This issue affects Workreap Core: from n/a before 3.4.4. |
| A access of uninitialized pointer vulnerability [CWE-824] vulnerability in Fortinet FortiOS 7.2.0 through 7.2.4, FortiOS 7.0.0 through 7.0.11, FortiOS 6.4 all versions, FortiOS 6.2 all versions, FortiOS 6.0 all versions, FortiProxy 7.2.0 through 7.2.3, FortiProxy 7.0.0 through 7.0.9, FortiProxy 2.0 all versions, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions allows an authenticated attacker to repetitively crash the httpsd process via crafted HTTP or HTTPS requests. |
| Backstage is an open framework for building developer portals. Prior to 0.16.1 and 0.17.8, the @backstage/backend-defaults package is affected by improper preservation of access restrictions during service credential delegation. An external service credential configured with access restrictions (e.g., read-only) could bypass those restrictions by routing requests through plugin delegation paths. This could allow a restricted service to perform operations beyond its intended scope, including write operations on plugins it was restricted to read-only access for. This issue is fixed in versions 0.16.1 and 0.17.8. |
| The Infility Global WordPress plugin before 2.16.25 does not perform any authorisation or nonce check on an AJAX action available to unauthenticated users, allowing any visitor to overwrite a machine-translation configuration value belonging to a companion Infility Global WordPress plugin before 2.16.25. |
| The MasterStudy LMS WordPress Plugin WordPress plugin before 3.7.55 does not verify that a user targeted through its student-enrolment feature has any relationship to the requesting instructor, allowing users with the Instructor role to overwrite the first name, last name and public display name of any registered user on the site, including administrators, enabling impersonation and phishing. |
| A2A Java SDK is the official Java SDK for the Agent2Agent (A2A) Protocol. Prior to 1.3.0.Final, the default InMemoryTaskStore configuration performs no authorization on task reads: the no-argument constructor sets authorizationProvider to null, and InMemoryTaskStore.get(String taskId) returns the stored task without checking the caller or owner. Authorization depends on supplying a TaskAuthorizationProvider and routing requests through AuthorizationRequestHandlerDecorator, whether installed through CDI or explicitly by the application. Default store wiring and manually constructed DefaultRequestHandler.builder().build() handlers, including integrations such as Spring, leave task reads unprotected when no effective authorization-provider and decorator check is installed. In a multi-caller deployment using the default configuration, a caller who knows or guesses another caller's task ID can retrieve the task status, context ID, message history, and artifacts. The default/reference transport endpoints do not enforce authentication, so the task-read disclosure is reachable by an unauthenticated caller rather than requiring a privileged account. This issue is fixed in version 1.3.0.Final. |
