| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The issue was addressed with improved checks. This issue is fixed in iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. Processing a maliciously crafted image may result in disclosure of process memory. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Analytic Server). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| In Eclipse Vert.x versions [4.0.0,4.5.35] or [5.0.0,5.2.2], when one `CachingWebClient` is shared across users — the documented pattern of a per-user `WebClientSession` over a shared caching client — a response that is specific to one user but is cacheable and not marked `private`/`no-store` is stored in the client-level shared cache tier and served to other users requesting the same URL. A later user's session, or an anonymous caller through the same client, can receive an earlier user's response. Depending on the response this discloses authenticated content or a session cookie, the latter enabling session fixation or hijacking. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Tuxedo). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Microsoft Office 2007 SP3, Excel 2007 SP3, PowerPoint 2007 SP3, Visio 2007 SP3, Word 2007 SP3, Office 2010 SP2, Excel 2010 SP2, PowerPoint 2010 SP2, Visio 2010 SP2, Word 2010 SP2, Office 2013 SP1, Excel 2013 SP1, PowerPoint 2013 SP1, Visio 2013 SP1, Word 2013 SP1, Excel 2013 RT SP1, PowerPoint 2013 RT SP1, Word 2013 RT SP1, Office 2016, Excel 2016, PowerPoint 2016, Visio 2016, Word 2016, and Visual Basic 6.0 Runtime allow remote attackers to bypass the ASLR protection mechanism via unspecified vectors, aka "Microsoft Office ASLR Bypass." |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 8.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H). |
| Improper neutralization of special elements in output used by a downstream component ('injection') in Azure Storage Library allows an authorized attacker to elevate privileges over a network. |
| Deserialization of Untrusted Data vulnerability in Apache Camel.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The camel-hazelcast component applies a default Hazelcast JavaSerializationFilterConfig to the instances it creates from its own configuration, a protection introduced by CVE-2026-43865. That change did not reach two of the configuration paths Camel builds itself, so those paths continued to create Hazelcast instances whose Java deserialization is unrestricted. ReplicatedHazelcastAggregationRepository extends HazelcastAggregationRepository but overrides doStart() without calling super.doStart(), keeping its own copy of the bootstrap block, and therefore never received the filter: a route using it without supplying a hazelcastInstance starts a Hazelcast member that deserializes values read from the backing ReplicatedMap with no class restriction. HazelcastDefaultComponent#getOrCreateHzClientInstance() builds its own ClientConfig when hazelcastMode=client is selected and neither a referenced ClientConfig nor hazelcastConfigUri is supplied, and likewise applied no filter, so client-mode endpoints behaved differently from node-mode endpoints for an otherwise identical configuration. In both cases an attacker able to publish into the Hazelcast cluster that the affected instance is attached to can cause a serialized Java object of their choosing to be deserialized inside Hazelcast's own serialization layer, before Camel processes the exchange, resulting in remote code execution. Hazelcast clusters have neither authentication nor TLS enabled by default. Selecting client mode is a topology choice rather than a security option, so neither path required the deployment to opt in to unsafe behaviour.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, supply an explicit Hazelcast configuration carrying a JavaSerializationFilterConfig, or inject a pre-built HazelcastInstance, since a user-supplied configuration is never overwritten by Camel. Alternatively set the JVM-wide filter -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;!* and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows high privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. While the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 5.8 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:N/A:N). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 6.9 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:R/S:C/C:N/I:H/A:H). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 8.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H). |
| Authentication bypass by spoofing in ICS before version 25.1.3.0 allows a remote unauthenticated attacker to execute arbitrary commands. This does not impact ICS version 22.7R2.14 or prior. |
| The MCTP over USB device class in subsys/pmci/mctp/mctp_usb.c splits RX handling across two threads: the system workqueue runs mctp_usb_class_out_work(), which parses host OUT data byte by byte and fills a packet buffer at usb->rx_pkt, while the USB device stack thread runs mctp_usb_class_disable(). The disable handler used k_work_cancel(), which removes a queued work item but returns immediately without waiting for a handler that is already running, and then called mctp_usb_reset_rx_state() to mctp_pktbuf_free() the packet buffer the worker may still be using.
Both entry points into mctp_usb_class_disable() are driven by the attached USB host: a SET_CONFIGURATION request and a USB bus reset both reach it via usbd_config_reset() in subsys/usb/device_next/usbd_config.c. A host that streams partial MCTP frames on the bulk OUT endpoint and repeatedly forces a configuration change or bus reset therefore controls both the data being parsed and the moment the teardown runs, and can retry the race indefinitely without credentials or user interaction.
If the free lands while the worker holds the pointer, the worker writes host-supplied bytes into freed memory of the dedicated MCTP heap (CONFIG_MCTP_HEAP_SIZE in subsys/pmci/mctp/mctp_memory.c), corrupting recycled buffers or sys_heap free-block metadata; this window requires genuine parallelism, i.e. CONFIG_SMP or a preemptible CONFIG_SYSTEM_WORKQUEUE_PRIORITY. With the default cooperative workqueue the worker can still yield inside mctp_bus_rx() (application callback or a control-message reply blocking in mctp_usb_tx()), after which it resumes and calls mctp_pktbuf_free(usb->rx_pkt) on a pointer the teardown has NULLed, dereferencing NULL and faulting on targets with null-pointer detection.
The fix replaces the cancel with k_work_cancel_sync() plus a new struct k_work_sync out_work_sync, so disable waits for the RX worker to finish before draining the FIFO and freeing the packet buffer. The affected code is the MCTP subsystem, which is marked experimental, built only with CONFIG_MCTP_USB. |
| The AVRCP Target role in subsys/bluetooth/host/classic/avrcp.c keeps its vendor-dependent response transmit state in a per-connection object selected by connection index (get_avrcp_tg()), with the per-transfer context (tid, sent_len, and the BT_AVRCP_TG_FLAG_TX_ONGOING flag) stored in the user_data of the queued response net_buf. The AVCTP teardown handler avrcp_disconnected() did not cancel tg->vd_rsp_tx_work and did not release the buffers still queued on tg->vd_rsp_tx_pending, so a link drop in the middle of a fragmented response left the buffer on the list with TX_ONGOING still set.
A remote AVRCP Controller can trigger this deterministically: it issues a vendor-dependent command whose response exceeds one AVRCP fragment (for example GetElementAttributes or GetCapabilities), lets bt_avrcp_tg_vendor_tx_work() emit the START fragment, and then drops the ACL link instead of sending REQUEST_CONTINUING_RESPONSE. The AVCTP control channel requires an encrypted BR/EDR link (BT_SECURITY_L2), so the attacker must be a paired peer within radio range; no user interaction is needed.
Because the Target objects are static and reused, the next connection landing on the same connection index finds the stale buffer at the head of vd_rsp_tx_pending. Every run of the TX work sees TX_ONGOING and returns immediately, so all further vendor-dependent responses queue behind the stale head and are never sent — a persistent loss of AVRCP Target function that no timeout clears and only a reboot recovers. Each cycle also leaks one response buffer from a shallow application pool, and a new peer that sends REQUEST_CONTINUING_RESPONSE clears the stale TX_ONGOING via bt_avrcp_tg_process_continuing_cmd(), causing the un-sent remainder of the previous peer's response to be transmitted to it.
The fix cancels tg->vd_rsp_tx_work and unrefs every buffer on tg->vd_rsp_tx_pending in avrcp_disconnected(); since the TX context lives in the buffer user_data, releasing the buffers also resets the TX state machine. There is no memory corruption: the pre-fix buffer is leaked with a live reference, so no use-after-free arises. |
| The Bluetooth host's GATT client passed the value of a received Handle Value Notification, Handle Value Indication or Multiple Handle Value Notification to bt_gatt_subscribe_params::notify callbacks using only the length derived from the received ATT PDU. bt_att_recv() in subsys/bluetooth/host/att.c validates only a minimum PDU length and does not enforce the negotiated ATT MTU, and the fixed ATT L2CAP channel in subsys/bluetooth/host/l2cap.c applies no rx.mtu check either, so the only ceiling was the ACL reassembly buffer CONFIG_BT_BUF_ACL_RX_SIZE. Values longer than the 512-octet maximum attribute length defined by the Bluetooth Core Specification (Vol 3, Part F, Section 3.2.9) could therefore be handed to subscribers that size their buffers to that documented limit.
A remote peer that a device has connected and subscribed to — a malicious, spoofed or compromised GATT server within radio range — triggers the flaw by sending a notification or indication whose value exceeds 512 octets on a subscribed handle. In the LE Audio unicast client this reaches a concrete out-of-bounds write: unicast_client_ep_notify() in subsys/bluetooth/audio/bap_unicast_client.c copies the notification into the 512-byte att_buf of struct unicast_client with net_buf_simple_add_mem() and no tailroom check whenever length equals bt_audio_get_max_ntf_size(), i.e. the negotiated ATT MTU minus three. notify_handler() in subsys/bluetooth/audio/bap_broadcast_assistant.c has the same shape. Reaching the overflow requires a build whose ATT MTU exceeds 515 octets (CONFIG_BT_L2CAP_TX_MTU and CONFIG_BT_BUF_ACL_RX_SIZE set for full-length attribute support); the shipped defaults are far smaller.
The overflow writes peer-controlled bytes past att_buf directly over the adjacent struct net_buf_simple net_buf — its data, __buf, len and size fields — which the subsequent long-read accumulation then uses as its destination, turning a small linear overflow into a controlled write. net_buf_simple_add() only asserts on insufficient tailroom unless CONFIG_NET_BUF_HARDENING is enabled, and that option is disabled by default, so ordinary production builds perform the copy. Beyond the in-tree LE Audio clients, any application subscriber that sized its receive buffer to the specification's 512-octet limit was exposed to the same overflow.
The fix rejects notification, indication and multiple-notification values longer than BT_ATT_MAX_ATTRIBUTE_LEN in call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c before any subscriber callback is invoked, so no subscriber can be handed more than the specified maximum. Remaining tuples of a multiple handle value notification are still delivered and oversized indications are still confirmed. |
| The can_add_rx_filter_msgq() system call installs a CAN RX filter whose callback (can_msgq_put() in drivers/can/can_common.c) is handed the caller's struct k_msgq * as user_data. The controller driver stores that raw pointer in its filter table and dereferences it from the RX path every time a matching frame arrives. The system call verifier z_vrfy_can_add_rx_filter_msgq() in drivers/can/can_handlers.c validated the queue only with K_SYSCALL_OBJ(), which is a point-in-time check of type, initialization and caller permission and says nothing about the object's lifetime.
On a build with CONFIG_USERSPACE=y and CONFIG_DYNAMIC_OBJECTS=y, an unprivileged user-mode thread that has been granted access to a CAN device can obtain a message queue whose lifetime it fully controls: k_object_alloc(K_OBJ_MSGQ) followed by k_msgq_alloc_init(). The lifetime of such an object is driven solely by its permission bitmask, and a pointer retained by the kernel is not represented there. After registering the filter, the thread calls k_object_release() — or simply terminates — and unref_check() frees the struct k_msgq storage while the CAN driver still holds the pointer.
The next matching CAN frame causes k_msgq_put() to run in supervisor context against freed memory that the attacker can have groomed with another kernel allocation: the frame payload is memcpy()d through the reused block's write_ptr, and the queue's wait_q (and poll_events under CONFIG_POLL) list nodes are manipulated. This yields kernel-heap corruption reachable from a user-mode thread, defeating the isolation CONFIG_USERSPACE is intended to provide; the same dangling pointer also arises benignly when an application thread exits without calling can_remove_rx_filter().
The fix validates the queue with K_SYSCALL_OBJ_STATIC(), which additionally rejects objects carrying K_OBJ_FLAG_ALLOC, so only statically defined queues (CAN_MSGQ_DEFINE()) may be registered from user mode. Supervisor-mode callers bypass the verifier and must themselves keep the queue valid until the filter is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/mpscq: disable preemption while pushing
A push makes the node the new tail, and then links it to its predecessor.
In between the queue isn't empty, but mpscq_pop() can't get at the node.
The consumers deal with that by trying again, with a cond_resched() in
the loop to give a preempted producer the chance to finish.
cond_resched() doesn't do that if the consumer has a higher priority than
the producer and both have to use the same CPU:
producer (SCHED_OTHER) consumer (SCHED_FIFO), same CPU
io_req_local_work_add()
mpscq_push()
prev = xchg(&q->tail, node)
<preempted> io_cqring_wait()
__io_run_local_work()
again:
cond_resched() // nothing to do
mpscq_pop() // NULL
// work pending, no events yet
goto again
The producer can be any task that is able to queue task_work for the
ring: an io-wq worker, or somebody who sends a message with
IORING_OP_MSG_RING. The consumer spins, holding ->uring_lock, until the
scheduler takes pity on the fair class, which takes about a second with
the default settings of the fair server, and forever without it. The
loops in tctx_task_work_run() and io_cancel_local_task_work() have the
same problem.
Don't allow preemption between the two steps. That bounds the time the
window is open on the CPU of the producer by what interrupts take, and a
consumer that waits for that is on another CPU. The cost is a
preempt_disable()/preempt_enable() pair per push. |
