| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| For XSA-308 logic was introduced, as VMX VMEntry checks do not like the
exact combination of state which occurs when #DB in intercepted, Single
Stepping is active, and blocked by STI/MovSS is active, despite this being
a legitimate state to be in. The resulting VMEntry failure is fatal to
the guest.
Sadly there is another special sub-case of the above, with branch tracing
enabled. In that case the prior adjustment would still cause a VMentry
failure, as before fatal to the guest. |
| libpcap BPF interpreter treats the offset in the 'ja L' BPF instruction as a signed integer to implement looping via backward jumps, but it does not limit the number of loop iterations. A crafted filter program or the 'protochain' primitive used on a crafted network packet can cause the interpreter to loop infinitely. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the detection engine to unexpectedly restart, resulting in a denial of service (DoS) condition.
The vulnerability is due to a flaw in logic handling when General Packet Radio Service (GPRS) Tunneling Protocol (GTP) extension headers are processed within the codec. An attacker could exploit this vulnerability by sending a crafted, fragmented UDP datagram that contains these headers to the Snort 3 Detection Engine of an affected device. A successful exploit could allow the attacker to cause the detection engine to enter an infinite loop, resulting in a DoS condition. |
| An Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability [CWE-89] vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.2, FortiAnalyzer 7.4.1 through 7.4.6, FortiAnalyzer Cloud 7.6.2, FortiAnalyzer Cloud 7.4.1 through 7.4.6, FortiAnalyzer Cloud 7.2.1 through 7.2.9, FortiManager 7.6.0 through 7.6.2, FortiManager 7.4.0 through 7.4.6 may allow a low privileged user to execute arbitrary commands via crafted requests. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1c: fix soft lockup on out-of-range tpd_cons read
The hardware can report an out-of-range tpd_cons (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. To avoid
a soft lockup treat it as "nothing new to clean" instead.
Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0,
4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that
the ports are directly linked to:
- Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap
precursor, before the lockup was captured with a full trace
elsewhere:
atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms
atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second
atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex>
65535 (0xffff) here is the same value tpd_cons reads back once the
loop below gets stuck.
- Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time
caught by the soft lockup watchdog with a full stack trace:
watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329]
CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy)
RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c]
Call Trace:
<TASK>
__napi_poll+0x32/0x1e0
napi_threaded_poll_loop+0x286/0x2e0
napi_threaded_poll+0xfd/0x140
kthread+0xf7/0x130
ret_from_fork+0x2da/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK> |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are MySQL Server: 9.7.0-9.7.3; MySQL Cluster: 9.7.0-9.7.3. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| Vyper 0.3.8 through 0.5.0b1 contains a compiler miscompilation vulnerability in parse_IfExp that reads nested arrays with narrower inner bounds using the wider result type's memory layout. When a ternary selects the narrower array, inner arrays after the first are read at wrong offsets, causing contracts to silently store corrupted values or revert. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Keep internal commands dispatchable during error handling
Commit 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()")
switched UFS internal commands to allocate requests on
hba->host->pseudo_sdev->request_queue, which shares the host tagset with
regular LUNs.
During error recovery, ufshcd_err_handling_prepare() calls
blk_mq_quiesce_tagset(&hba->host->tag_set), marking all queues in the
tagset as quiesced, including pseudo_sdev->request_queue. When
ufshcd_verify_dev_init() subsequently issues internal commands (e.g. NOP
OUT UPIU) via blk_execute_rq(), blk_mq_run_hw_queue() skips running the
quiesced queue, resulting in an unrecoverable circular wait deadlock.
Keep quiescing the tagset and unquiesce the pseudo SCSI device on top of
that, so internal commands stay dispatchable while the logical units remain
quiesced. Re-quiesce the pseudo device before unquiescing the tagset so
that quiesce_depth stays balanced.
Clock scaling and ufshcd_pause_command_processing() are unaffected: they
keep quiescing the whole tagset, internal commands included. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: fix use-after-free in nfc_get_local_general_bytes
Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by
nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by
invoking nfc_llcp_local_put(local) after accessing local->gb. However,
if the reference count drops to zero, local is freed immediately,
leading to a use-after-free when callers access the returned pointer.
Alternative approaches using dynamic allocation (e.g. kmemdup) introduced
memory leaks because callers consistently treat the returned pointer as
borrowed memory.
Fix this properly by refactoring nfc_llcp_general_bytes() and
nfc_get_local_general_bytes() to accept a caller-provided output buffer
(out_gb) and its maximum length (gb_max_len). The general bytes are
safely copied into out_gb before calling nfc_llcp_local_put(local),
ensuring safe lifetime management without ownership transfer complications.
Update all callers across drivers (microread, pn533, pn544, st21nfca,
digital_dep, and nci) to provide their own destination buffers and pass
them to nfc_get_local_general_bytes(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range hw_next_to_clean (seen as 0xffff) while
the PCIe link/MAC is resetting. An out-of-range value can never be
reached and the loop below would spin forever. Treat it as "nothing
new to clean" instead. |
| Heym from 0.0.55 before 0.0.121 contains a privilege escalation vulnerability that allows shared collaborators to overwrite a workflow's error_workflow_id because the field is missing from OWNER_ONLY_EXECUTION_FIELDS. Attackers can point the error workflow to their own workflow with an HTTP node, and when the parent workflow errors the owner's decrypted credentials are injected and exfiltrated. |
| Plane is an open-source project management tool. In 1.3.1 and earlier, ProjectMemberViewSet.partial_update places its authorization checks inside the role update branch, so a guest or member can omit role and change another ProjectMember record's is_active field, including deactivating a project administrator. ProjectMemberPreferenceEndpoint.patch separately trusts the member_id path value and lets a project member overwrite another member's preferences. These missing object-level authorization checks permit membership disruption and cross-member preference tampering. The vulnerability is fixed in 1.4.0. |
| OpenAEV is an open source platform allowing organizations to plan, schedule and conduct cyber adversary simulation campaign and tests. Prior to version 2.260622.0, on a default installation, the `/api/player/**` lessons endpoints can be called without authentication, and they trust a client-supplied `userId` query parameter without verifying that the caller is that user or a member of the exercise. An unauthenticated client that knows an exercise UUID can read lessons-learned questions and answers (including each answer's author identity) and create or overwrite answers attributed to an arbitrary user. Version 2.260622.0 contains a patch. |
| FileRise is a self-hosted web-based file manager with multi-file upload, editing, and batch operations. Prior to 3.23.0, FileRise stores failed TOTP verification attempts in $_SESSION. An attacker who already possesses a target account's valid primary credential can restart the login workflow in a new session and restore the second-factor attempt allowance, permitting continued online TOTP guessing beyond the intended five-attempt limit. The pending-login TOTP handlers did not share a durable account-wide limit. This issue is fixed in version 3.23.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::TlmPacketizer TlmRecv_handler fixed-slot copy TlmRecv_handler copies val.getSize bytes into entry.channelSize storage without confirming that the runtime value fits. When a telemetry update for a configured channel carries a serialized value larger than that channel fixed slot, the copy overwrites adjacent channel fields and causes corrupted packetized telemetry to be emitted. This issue is fixed in version 4.3.0. |
| EvoScientist 0.1.0 before 0.2.5 contains an approval bypass vulnerability that allows attackers to run host shell commands by delegating them to async sub-agents lacking an interrupt_on gate. Attackers can plant instructions in ingested content such as fetched web pages, so the agent calls start_async_task and runs commands with user privileges and environment secrets. |
| Dockhand before 1.0.46 contains an arbitrary file read vulnerability that allows non-admin users with stacks:edit permission to read files through the path parameter of /api/system/files/content. Attackers can supply absolute paths to read /etc/shadow, /etc/passwd, git .git/config credentials, and SSH keys from the Dockhand container. |
| OpenCATS before 0.10.0 contains a missing authorization vulnerability in ajax/deleteActivity.php and ajax/editActivity.php that allows READ-level users to edit and delete activity entries. Authenticated attackers can supply an arbitrary activityID via GET or POST to modify or delete activity and pipeline history for candidates, contacts and companies. |
| OpenSRE through 0.1.2026.10.19 contains an approval gate bypass vulnerability that allows attackers to execute shell_run commands without confirmation because the headless presenter's execution_allowed() always returns True. Attackers can inject instructions into alerts or Slack messages triaged by the agent to run commands on the host and exfiltrate LLM, Slack and cloud credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: release the GEM object on virtio_gpu_vram_create() errors
virtio_gpu_vram_create() frees the object with a bare kfree(vram) on
both error paths after drm_gem_private_object_init() has run, and on the
second one after drm_gem_create_mmap_offset() has linked obj->vma_node
into the device's VMA offset manager. The freed object stays in that
interval tree, so a later lookup or insertion walks freed memory, and
the dma_resv and gpuva lock are never destroyed.
Call drm_gem_object_release() before kfree() on both paths. |
