Export limit exceeded: 411542 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46849 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-107431 | 2 Crocoblock, Wordpress-extensions | 2 Jetformbuilder, Jetformbuilder | 2026-10-24 | 7.5 High |
| Missing Authorization vulnerability in Crocoblock JetFormBuilder jetformbuilder allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects JetFormBuilder: from n/a through 3.6.6. | ||||
| CVE-2026-107433 | 2 Miniorange, Wordpress-extensions | 2 Wp Oauth Server, Wp Oauth Server | 2026-10-24 | 6.5 Medium |
| Missing Authorization vulnerability in miniOrange WP OAuth Server miniorange-oauth-20-server allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP OAuth Server: from n/a through 6.4.0. | ||||
| CVE-2026-91157 | 1 Discourse | 1 Discourse | 2026-10-24 | 7.5 High |
| Discourse is an open-source discussion platform. Prior to 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9, sites with secure uploads enabled did not reconcile existing upload security metadata when a previously public category became read-restricted or when category permissions changed during a bulk import. Media and attachments uploaded while the category was public retained a public accessibility flag and remained reachable by anonymous users through their short upload URLs, including uploads associated with deleted topics. This issue is fixed in versions 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9. | ||||
| CVE-2026-98832 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: save IRQ state in blkg_tryget_closest() bio_set_dev() associates the bio with a blkg through bio_associate_blkg(). If the blkg lookup misses, blkg_tryget_closest() takes q->queue_lock with spin_lock_irq() and releases it with spin_unlock_irq(), which unconditionally enables local interrupts. Callers may call bio_set_dev() with interrupts already disabled, e.g. dm-thin's pool_map() does so while holding pool->lock taken with spin_lock_irq(). The nested spin_unlock_irq() then enables interrupts while pool->lock is still held, so an I/O completion softirq can run on the same CPU, re-acquire pool->lock (thin_endio(), or overwrite_endio() -> complete_mapping_preparation()) and deadlock. lockdep reports this as inconsistent SOFTIRQ-ON-W to IN-SOFTIRQ-W usage. Commit 3a762de55b4e ("block: save irq state in blkg_lookup_create()") fixed the same problem while the lock lived in blkg_lookup_create(), but commit 9327a865e395 ("blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()") moved the locking into blkg_tryget_closest() and reverted it to spin_lock_irq(). Save and restore the caller's IRQ state instead. | ||||
| CVE-2026-110371 | 2 Wordpress-extensions, Wpchill | 2 Strong Testimonials, Strong Testimonials | 2026-10-24 | 4.3 Medium |
| Missing Authorization vulnerability in WP Chill Strong Testimonials strong-testimonials allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Strong Testimonials: from n/a through 3.3.12. | ||||
| CVE-2026-106600 | 2 Liquid Web / Stellarwp, Wordpress-extensions | 2 Givewp, Givewp | 2026-10-24 | 5.3 Medium |
| Missing Authorization vulnerability in Liquid Web / StellarWP GiveWP give allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects GiveWP: from n/a through 4.18.0. | ||||
| CVE-2026-106116 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 5.3 Medium |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, ExifReader.ReadValues64 trusts the 64-bit BigTIFF IFD entry count and iterates once per declared entry. When fewer than 20 bytes remain, ExifReader.ReadValue64 returns without advancing the stream or terminating the outer loop, so a small malformed BigTIFF can keep one decoder thread executing for an attacker-controlled duration. This report does not claim worker-pool exhaustion. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-104390 | 2 Arraytics, Wordpress-extensions | 2 Booktics, Booktics | 2026-10-24 | 4.3 Medium |
| Missing Authorization vulnerability in Arraytics Booktics booktics allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Booktics: from n/a through 1.0.27. | ||||
| CVE-2026-39751 | 2 Payplug, Wordpress-extensions | 2 Payplug For Woocommerce (official), Payplug For Woocommerce (official) | 2026-10-24 | 7.5 High |
| Unauthenticated Broken Access Control in PayPlug for WooCommerce (Official) <= 3.1.0 versions. | ||||
| CVE-2026-99085 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU. | ||||
| CVE-2026-114263 | 1 Projectworlds | 1 Advanced Library Management System | 2026-10-23 | 7.3 High |
| A vulnerability was identified in ProjectWorlds Advanced Library Management System 1.0. The affected element is the function mysqli_query of the file individual_report_search.php. Such manipulation of the argument roll_number leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-114257 | 1 Oretnom23 | 1 File-management-system-php | 2026-10-23 | 7.3 High |
| A security vulnerability has been detected in oretnom23 file-management-system-php up to 2e3c1ebe60f121e8df4fb3f544f0e9591d9a01e4. Affected by this vulnerability is the function readfile of the file download.php of the component File Download. Such manipulation of the argument ID leads to sql injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-114254 | 1 Oretnom23 | 1 File-management-system-php | 2026-10-23 | 7.3 High |
| A vulnerability was identified in oretnom23 file-management-system-php up to 2e3c1ebe60f121e8df4fb3f544f0e9591d9a01e4. This affects the function Login of the file admin_class.php. The manipulation of the argument username/password leads to sql injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-105932 | 1 Apache | 1 Pulsar | 2026-10-23 | N/A |
| The Apache Pulsar broker admin REST API provides endpoints to read, set and remove the topic-level entry filter policy of a topic. For persistent topics these endpoints check that the caller is authorized for the entry filters topic policy operation. The corresponding endpoints for non-persistent topics (/admin/v2/non-persistent/{tenant}/{namespace}/{topic}/entryFilters) do not perform this authorization check. The only authorization check these endpoints perform is an indirect lookup permission check, made while the topic's partition metadata is retrieved; it is present in all affected versions. As a result, when authentication and authorization are enabled, an authenticated user who has been granted produce or consume permission on a non-persistent topic, or on its namespace, but not permission to manage the topic's policies can read, replace or remove the topic-level entry filter policy of that topic. These operations should be restricted to users with the tenant admin role or the superuser role. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different. The practical impact is limited by two broker configuration requirements, neither of which is met by default: - Entry filters must have been installed by the operator. Entry filter implementations are loaded only at broker startup from the broker's entry filters directory, which is empty by default. A request can only select among entry filters the operator has already deployed; setting any other filter name is rejected. The issue does not allow a caller to install or load entry filter code or to run arbitrary code in the broker. - Topic-level entry filter policies must be allowed to override the broker-level configuration (allowOverrideEntryFilters, which is disabled by default). When this setting is disabled, the topic-level entry filter policy has no effect on message dispatch. In deployments where both conditions are met, an unauthorized user can remove the topic-level entry filter policy of a non-persistent topic, for example one used to restrict which messages are delivered to consumers, or apply a different installed entry filter that withholds messages from subscriptions of that topic. Removing it makes the topic fall back to the namespace-level or broker-level entry filters, which are not removed. A changed policy affects only subscription dispatchers created after the change, for example for new subscriptions or when a subscription is re-created after all of its consumers have disconnected; dispatchers that already exist keep the entry filters they were created with. Because non-persistent topics do not store messages, messages withheld by an entry filter are not delivered. Reading the policy discloses only the names of the configured entry filters. The issue does not allow reading message contents, and entry filters cannot modify message payloads. Persistent topics and namespace-level entry filter policies are not affected. Apache Pulsar versions before 3.3.0 are not affected, because in those versions the entry filters topic policy check is made in code shared by the persistent and non-persistent endpoints. This issue affects Apache Pulsar versions from 3.3.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 3.3.x and 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately and have deployed entry filters should keep allowOverrideEntryFilters at its default value of false, so that topic-level entry filter policies do not affect message dispatch. | ||||
| CVE-2026-114623 | 1 Baserproject | 1 Basercms | 2026-10-23 | 6.5 Medium |
| baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, an authenticated user with only theme-file view permission can traverse outside the theme directory through the optional BcThemeFile plugin's Admin web screen. ThemeFilesController::parseArgs() constructs a path containing literal ../ segments, and the view and edit actions pass it to ThemeFilesService::get() without containment validation. Authorization checks the unresolved request path, after which ThemeFile::_getContents() reads the resolved file and exposes its contents in the form textarea. A client must preserve the dot segments rather than normalize them away. Readable files are limited to .php, .css, .js, and .ctp; this can disclose application source and config/install.php database credentials in MySQL or PostgreSQL deployments, while SQLite configurations have an empty database password. Reading config/app_local.php may expose the Security.salt fallback, which is effective only when not overridden by environment configuration. The flaw does not disclose .env, .pem, or SQLite .db files, does not itself permit file writes or code execution, and does not affect the separate API getFullpath() route. The plugin is disabled by default and unauthenticated requests are not sufficient. This issue has been patched in versions 5.3.2 and 5.4.2. | ||||
| CVE-2026-115478 | 1 The-40-thieves | 1 Obsidian-tc | 2026-10-23 | N/A |
| obsidian-tc is a governed, agent-ready Model Context Protocol server for Obsidian vaults. From 1.0.1 until 1.31.4, `create_entity`, `link_entities`, `rename_entity`, `unlink_entities` and `delete_entity` regenerate memory notes from SQLite at the computed `memory/<type>/<name>.md` path without reliably preserving note ownership or the consistency of a failed lifecycle operation. During shared materialization, a hand-authored note or an orphan left by a different entity whose name sanitized to the same path could have its entire body overwritten on the next write naming that type and name, with non-owned frontmatter preserved. `rename_entity` also seeded the destination path with a direct atomic write without validating ownership and could overwrite a foreign note there. Separately, several tools mutated SQLite before fallible filesystem work: `create_entity` and `link_entities` inserted the row or relation before materialization; `rename_entity` updated the entity, including a retired status, before updating its note; `unlink_entities` removed a relation before rematerializing the source note; and `delete_entity`'s cascade removed the target and its relations before rematerializing neighbouring notes. A later filesystem failure could therefore leave a row or relation changed and the memory graph inconsistent with the notes on disk even when the operation failed. An authorized caller with the required memory-tool permissions could, without intending to, destroy the body of a vault note outside the entity being written; `delete_entity` additionally requires its deletion permission and destructive confirmation, which this memory flaw does not bypass. Snapshots-before-write through `restore_note` mitigate the overwrite only where snapshots are enabled and the note had previously been written through obsidian-tc. This issue is fixed in version 1.31.4. | ||||
| CVE-2026-19947 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 5.3 Medium |
| The device multiplexer pseudo-driver in drivers/misc/devmux/devmux.c exposes two system calls, devmux_select_get() and devmux_select_set(). When CONFIG_USERSPACE is enabled, their user-mode verifiers z_vrfy_devmux_select_get() and z_vrfy_devmux_select_set() forwarded directly to the kernel implementations without performing any kernel-object validation — no k_object_access_check() and no driver object check. Compounding this, DEVICE_DT_INST_DEFINE() registered devmux instances with a NULL driver API pointer, which causes scripts/build/gen_kobject_list.py to skip them entirely, so a devmux device had no struct k_object and no permission on it could be granted or withheld in the first place. Any thread running in user mode can reach the defect: device pointers such as DEVICE_DT_GET(DT_NODELABEL(devmux0)) are compile-time constants available to application code, and the syscall accepted them from a thread that had never been granted access to the device. The kernel implementations do validate the pointer against the static devmux instance table and bounds-check the selection index, so this is not a memory-safety issue; the failure is purely one of authorization. Exposure requires CONFIG_USERSPACE=y together with the experimental CONFIG_DEVMUX=y (which depends on CONFIG_DEVICE_MUTABLE) and a zephyr,devmux devicetree node. An unprivileged user-mode thread can read and change which downstream device a multiplexer forwards to, bypassing the userspace object-permission model. Because a devmux forwards the data, configuration and API of the selected device — its documented use being zephyr,console and zephyr,shell-uart switching — an attacker can suppress console, log and shell output, redirect that output to a downstream device it is able to observe, or flip the selection underneath another thread that is legitimately using the multiplexer. The impact is bounded to the devicetree-fixed set of downstream devices; no out-of-bounds access or arbitrary pointer dereference is reachable. The fix declares __subsystem struct devmux_driver_api and attaches a DEVICE_API(devmux, devmux_api) instance to each devmux device so that it becomes a tracked K_OBJ_DRIVER_DEVMUX kernel object, and adds K_OOPS(devmux_inst_get(dev) == SIZE_MAX) plus K_OOPS(k_object_access_check(dev) != 0) to both verifiers. | ||||
| CVE-2026-19676 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 7.8 High |
| The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver. Every in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus. The impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device. The fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length. | ||||
| CVE-2026-114441 | 1 Oretnom23 | 1 Php-travel-agency-system | 2026-10-23 | 7.3 High |
| A weakness has been identified in oretnom23 php-travel-agency-system. This issue affects some unknown processing of the file admin/update.php. This manipulation of the argument action/full_name/visa_no/hiden/title/description/page_id/user causes sql injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-114384 | 1 Itsourcecode | 1 Online Cake Ordering System | 2026-10-23 | 6.3 Medium |
| A security vulnerability has been detected in itsourcecode Online Cake Ordering System 1.0. Affected is an unknown function of the file /transactionsave.php. Such manipulation of the argument del leads to sql injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. | ||||