| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use of uninitialized resource in Windows Event Logging Service allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr
amdgpu_debugfs_gpr_read() drops its runtime PM reference right after
reading the wave registers. When copying them to userspace fails, it
jumps to the err label, which drops the reference a second time. A read
into a bad buffer on Navi31 either steals a reference somebody else
holds (power/runtime_usage goes from 1 to 0) or underflows the count:
amdgpu 0000:03:00.0: Runtime PM usage count underflow!
The registers are already in the kernel buffer at that point, so finish
the hardware access first and copy the buffer with a single
copy_to_user() instead of the put_user() loop with its own error path.
(cherry picked from commit 31035bbd74f7c3e10c163db875b8e67f8b50ee6a) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION
smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION,
that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns
FileSysIdentifier. Those eight bytes go to the client as they are found
in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
Report the file system id statfs() returned, which is what the field is
for. FileSysIdentifier is __le64 and f_fsid is a pair of ints, so
assemble the value first, val[0] as the low half, and convert it on the
way out. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION
smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION,
that is the whole of struct smb2_fs_control_info, but never assigns
FileSystemControlFlags. Those four bytes go to the client as they are
found in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
ksmbd does not implement quota tracking, so report no control flags. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in
smb2_get_info_filesystem() reports 64 bytes for FS_OBJECT_ID_INFORMATION,
that is the whole of struct object_id_info, but writes only 46 of them:
- objid[] is 16 bytes, and when the volume UUID is not available only
sizeof(stfs.f_fsid) (8) bytes are copied into it;
- extended_info.version_string[] is STRING_LENGTH (28) bytes, and only
strlen("1.1.0") (5) bytes are copied into it.
The response buffer is zeroed on allocation (kvzalloc() in
smb2_allocate_rsp_buf()), so for a standalone request the remaining 31
bytes are zero. In a compound request they need not be. The offset of
the next response is advanced by the length pinned for the previous one,
so if a preceding command wrote its reply into the buffer and then
failed, smb2_set_err_rsp() pins only the short error response and the
next reply lands inside the area that has already been written. Only
the header is cleared there:
memset((char *)rsp_hdr, 0, sizeof(struct smb2_hdr) + 2);
The client then receives up to 31 bytes of a response it was not meant
to see, including one that failed with an access denied error.
Clear the structure before filling it in. As a side effect
version_string is now NUL terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM
The probe function puts the device into the runtime PM active state with
only the "iis" bus clock enabled, but it also sets priv->op_clk to the
parent of the RCLK_SRC mux without enabling it. The runtime PM suspend
callback disables both clocks, so the first runtime suspend after probe
disables op_clk once more than it was enabled.
On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate,
so this triggers the following warning during boot:
WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45
i2s_bus already disabled
...
Workqueue: pm pm_runtime_work
Call trace:
...
clk_core_disable from clk_disable+0x28/0x34
clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s]
i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298
genpd_runtime_suspend from __rpm_callback+0x48/0x18c
__rpm_callback from rpm_callback+0x4c/0x50
rpm_callback from rpm_suspend+0xf4/0x718
rpm_suspend from pm_runtime_work+0x9c/0xa0
...
Fix this by enabling op_clk in probe right after getting it, so the clock
state matches the runtime PM active state, and by disabling it in remove. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: validate transport header presence in set_ipv6_addr
When executing IPv6 address rewrite actions on IPv6 fragments,
set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr()
processes a non-first IPv6 fragment, it sets key->ip.proto to
NEXTHDR_FRAGMENT and returns early without calling
skb_set_transport_header().
update_ipv6_checksum() unconditionally evaluates skb_transport_offset()
on entry before checking l4_proto. Because skb->transport_header is
uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although
it is completely harmless.
Fix this by returning early in update_ipv6_checksum() if l4_proto is
NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset
for fragments while preserving the debug warning for any other protocol
where the transport header is unexpectedly missing.
See the syzbot trace:
!skb_transport_header_was_set(skb)
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635
[...]
RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline]
RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline]
RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399
[...]
Call Trace:
<TASK>
set_ipv6 net/openvswitch/actions.c:531 [inline]
do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366
ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592
ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705
genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114
genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209
netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218
netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode()
When paths_from_inode() fails, scrub_print_warning_inode() jumps to err
without dropping the reference taken by btrfs_get_fs_root(), leaking a
reference to the root every time path resolution fails while printing
scrub warnings. Every other error and success path of the function
drops the reference.
Drop the reference on the paths_from_inode() failure path too. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: xilinx: fix runtime PM leak on request error path
pm_runtime_get_sync() leaves the usage counter incremented even when it
fails, and xgpio_request() returns the error without dropping it.
gpiolib does not call ->free() when ->request() fails, so xgpio_free(),
which holds the only matching pm_runtime_put(), never runs. The reference
is leaked and the controller can no longer runtime-suspend, so its clock
stays enabled.
Switch to pm_runtime_resume_and_get(), which only increments the usage
counter on success. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ch: Do not keep references to data transfer element devices
ch_readconfig() looks up the scsi_device of every data transfer element
whose SCSI id the changer reports in READ ELEMENT STATUS, and stores it in
ch->dt[]. scsi_device_lookup() takes a reference, and nothing ever drops
it: ch_destroy() frees the array with kfree(). ch->dt[] is read nowhere
else - it only supplies the vendor, model and revision printed in the same
loop.
Once such a drive is removed, its scsi_device can never be released. It
stays on the host's device list at its address, so a new device there is
refused by anything that walks the list - target_core_pscsi reports
"scsi_device_get() failed for H:C:T:L" - and the low-level driver's module
can no longer be unloaded. Only a reboot recovers.
It shows with any changer that reports its drives' ids; with the mhvtl
virtual library (IBM 3573-TL personality), each create and remove of a
library with four drives leaves four references behind, counted by the
module's use count in lsmod. With ch not bound the count is unchanged, and
with this patch applied it is unchanged too.
Drop the reference as soon as the name has been printed, and remove the now
unused dt[] array. That also removes the array leaked when ch_probe() fails
after ch_readconfig().
The same leak was reported with an RFC patch in 2022, which was not merged. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: reset ar->num_stations on hardware start
When (multiple) hw restart occurs, we end up in a situation where we
cannot accept new stations / mesh peers. This seems to be the
'num_stations' in 'struct ath11k' that did not get reset properly in
this case. In ath11k_mac_op_start(), it was indeed the only accounting var
that did not get reset so let's clear it too.
This avoids problems like those:
[1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0
[1248828.088115] Call trace:
[1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P)
[1248828.088119] ieee80211_reconfig+0x774/0x1438
[1248828.088123] ieee80211_restart_work+0x10c/0x178
[1248828.088127] process_one_work+0x178/0x3c0
[1248828.088130] worker_thread+0x280/0x440
[1248828.088133] kthread+0xe0/0xf8
[1248828.088137] ret_from_fork+0x10/0x20
[1248828.088141] ---[ end trace 0000000000000000 ]---
[1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128)
[1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak
The struct rtc_wkalrm has padding holes after the 'pending' member.
When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized
kernel stack data residing in these holes may be leaked.
Zero-initialize the struct at declaration to eliminate this information
leak risk.
Fixes smatch warnings:
- drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't
leak information (struct has a hole after 'pending') |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_flow_offload: drop flowtable reference on init error path
nft_flow_offload_init() bumps the flowtable use count with
nft_use_inc() before calling nf_ct_netns_get(). When the latter
fails, the error is returned as-is and the reference is leaked.
The upper layers do not balance it either: nf_tables_newexpr()
clears expr->ops when the expression init callback fails, so the
nft_expr_more() iteration in nft_rule_expr_deactivate() and
nf_tables_rule_destroy() stops right before the failed expression
and its ->destroy callback, which would drop the reference, never
runs.
Each failed rule addition therefore leaks one flowtable reference
and the flowtable can no longer be removed: NFT_MSG_DELFLOWTABLE
keeps reporting -EBUSY even though no rule references it.
Save the nf_ct_netns_get() return value and undo the nft_use_inc()
when it fails, restoring the inc/dec pairing within
nft_flow_offload_init() itself. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: storage: sierra_ms: reject short SWoC info transfers
sierra_get_swoc_info() requests sizeof(struct swoc_info) (60) bytes
from the device via usb_control_msg(), but its callers only treat a
negative return value as failure. A device that answers the
vendor-specific GetSwocInfo request with a short IN transfer is
therefore accepted, leaving the tail of the freshly allocated
(kmalloc(), non-zeroing) swoc_info buffer uninitialized.
truinst_show() subsequently prints swocInfo->rev, swocInfo->LinuxSKU
and swocInfo->LinuxVer from that buffer into the world-readable
(0444) "truinst" sysfs attribute. An emulated/malicious USB device
(VID 0x1199, PID 0x0fff) can exploit this to disclose up to 5 bytes
of stale kernel heap memory (kmalloc-64) to unprivileged userspace,
once per sysfs read, indefinitely. On kernels built without
init_on_alloc this leaks recently freed heap contents.
Only accept the transfer when the full structure was received.
sierra_ms_init() already retries failed queries, so well-behaved
devices are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: vcc: zero-initialize control packet in vcc_send_ctl()
The stack-allocated struct vio_vcc pkt was partially initialized,
leaving the tag.stype_env field uninitialized before being sent via
ldc_write(), potentially leaking kernel stack data to the LDC peer. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ
The Cadence NAND interrupt handler uses both the IRQ lock and completion
object. Registering the IRQ before initializing them leaves a window in
which a pending interrupt can access uninitialized synchronization state.
Initialize them before registering the handler. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: set info->band for 802.3 encap offload frames
Unlike the 802.11 TX paths, ieee80211_8023_xmit() does not set
info->band from the channel context on non-MLD interfaces. It stays at
0, so ieee80211_get_tx_rates() uses the wrong band for these frames.
Set it the same way as ieee80211_build_hdr(): drop the frame if there is
no channel context, and leave the band at 0 on MLD interfaces. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: discard post-EOF pagecache when extending a file via zero range
smb3_zero_range() removed the pagecache only for the range being zeroed,
so when it extends the file the folio straddling the old EOF - which may
hold data dirtied past EOF through an mmap - was never dropped and became
visible as file content once the file was extended.
Lower the discard boundary to the smaller of the zero-range offset and the
old EOF. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxcjk-1013: reject duplicate event disable
The IIO core does not filter duplicate writes to the event enable
attribute. kxcjk1013_write_event_config() already ignores repeated
enable requests, but a repeated disable request still calls
kxcjk1013_set_power_state(data, false), dropping a runtime PM reference
that was not acquired for this request. This can underflow the runtime
PM usage count and trigger a "Runtime PM usage count underflow" warning.
Return early when the requested state already matches ev_enable_state. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Ensure bounce buffer used for unaligned case is zeroed.
iio_push_to_buffers_with_ts_unaligned() leaks uninitialized heap memory
to userspace if the data passed in is not a multiple of 8 bytes and the
timestamp is enabled. Specify __GFP_ZERO for the devm_krealloc()
to ensure any extra space is cleared. |
