| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the SNORT detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a file policy that is configured to block the Server Message Block Version 2 (SMB2) protocol. The vulnerability is due to the incorrect detection of an SMB2 file when the detection is based on the length of the file. An attacker could exploit this vulnerability by sending a crafted SMB2 transfer request through the targeted device. A successful exploit could allow the attacker to bypass filters that are configured to block SMB2 traffic. Cisco Bug IDs: CSCve58398. |
| A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions within the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit. This vulnerability affects the following Cisco products if they are running Cisco NX-OS Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches - Standalone, NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvb86832, CSCvd86474, CSCvd86479, CSCvd86484, CSCvd86490, CSCve97102, CSCvf12757, CSCvf12804, CSCvf12815, CSCvf15198. |
| A vulnerability in the Start Before Logon (SBL) module of Cisco AnyConnect Secure Mobility Client Software for Windows could allow an unauthenticated, local attacker to open Internet Explorer with the privileges of the SYSTEM user. The vulnerability is due to insufficient implementation of the access controls. An attacker could exploit this vulnerability by opening the Internet Explorer browser. An exploit could allow the attacker to use Internet Explorer with the privileges of the SYSTEM user. This may allow the attacker to execute privileged commands on the targeted system. This vulnerability affects versions prior to released versions 4.4.00243 and later and 4.3.05017 and later. Cisco Bug IDs: CSCvc43976. |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of an affected device, related to the Guest Portal. More Information: CSCvd74794. Known Affected Releases: 1.3(0.909) 2.1(0.800). |
| A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916. |
| A vulnerability in the UpgradeManager of the Cisco Prime Collaboration Provisioning Tool 12.1 could allow an authenticated, remote attacker to write arbitrary files as root on the system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by triggering the upgrade package installation functionality. Cisco Bug IDs: CSCvc90304. |
| A vulnerability in the logging subsystem of the Cisco Prime Collaboration Provisioning tool could allow an unauthenticated, local attacker to acquire sensitive information. More Information: CSCvd07260. Known Affected Releases: 12.1. |
| A vulnerability in the web framework of Cisco Firepower Management Center could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface. Affected Products: Cisco Firepower Management Center Releases 5.4.1.x and prior. More Information: CSCuy88951. Known Affected Releases: 5.4.1.6. |
| A vulnerability in Cisco WebEx Meeting Server could allow an unauthenticated, remote attacker to modify the welcome message of a meeting on an affected system. The vulnerability is due to insufficient security settings on meetings. An attacker could exploit this vulnerability by modifying the welcome message to a meeting. A successful exploit could allow the attacker to modify the welcome message of any known meeting. Cisco Bug IDs: CSCvf68695. |
| Cisco WebEx Meetings Server before 1.1 uses meeting IDs with insufficient entropy, which makes it easier for remote attackers to bypass authentication and join arbitrary meetings without a password, aka Bug ID CSCuc79643. |
| A vulnerability in the installation procedure for Cisco Prime Network Software could allow an authenticated, local attacker to elevate their privileges to root privileges. More Information: CSCvd47343. Known Affected Releases: 4.2(2.1)PP1 4.2(3.0)PP6 4.3(0.0)PP4 4.3(1.0)PP2. Known Fixed Releases: 4.3(2). |
| A vulnerability in the Telnet CLI command of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into the Telnet CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86771. |
| A vulnerability in the web-based interface of Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to view sensitive information on an affected system. The vulnerability exists because the affected software does not sufficiently protect system software version information when the software responds to HTTP requests that are sent to the web-based interface of the software. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based interface of the affected software. A successful exploit could allow the attacker to view sensitive information about the software, which the attacker could use to conduct additional reconnaissance attacks. Cisco Bug IDs: CSCvf66155. |
| A vulnerability in the detection engine reassembly of Secure Sockets Layer (SSL) packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition because the Snort process consumes a high level of CPU resources. Affected Products: This vulnerability affects Cisco Firepower System Software running software releases 6.0.0, 6.1.0, 6.2.0, or 6.2.1 when the device is configured with an SSL policy that has at least one rule specifying traffic decryption. More Information: CSCvc58563. Known Affected Releases: 6.0.0 6.1.0 6.2.0 6.2.1. |
| A vulnerability in the web interface of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to access sensitive data. The attacker does not need administrator credentials and could use this information to conduct additional reconnaissance attacks. More Information: CSCvc60031 (Fixed) CSCvc60041 (Fixed) CSCvc60095 (Open) CSCvc60102 (Open). Known Affected Releases: 2.2 2.2(3) 3.0 3.1(0.0) 3.1(0.128) 3.1(4.0) 3.1(5.0) 3.2(0.0) 2.0(4.0.45D). |
| A vulnerability in the authentication, authorization, and accounting (AAA) implementation of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability occurs because AAA processes prevent the NX-OS System Manager from receiving keepalive messages when an affected device receives a high rate of login attempts, such as in a brute-force login attack. System memory can run low on the FXOS devices under the same conditions, which could cause the AAA process to unexpectedly restart or cause the device to reload. An attacker could exploit this vulnerability by performing a brute-force login attack against a device that is configured with AAA security services. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects the following Cisco products if they are running Cisco FXOS or NX-OS System Software that is configured for AAA services: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System (UCS) 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuq58760, CSCuq71257, CSCur97432, CSCus05214, CSCux54898, CSCvc33141, CSCvd36971, CSCve03660. |
| A vulnerability in the Universal Plug-and-Play (UPnP) implementation in the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, Layer 2-adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition. The remote code execution could occur with root privileges. The vulnerability is due to incomplete range checks of the UPnP input data, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a malicious request to the UPnP listening port of the targeted device. An exploit could allow the attacker to cause the device to reload or potentially execute arbitrary code with root privileges. This vulnerability affects all firmware releases of the Cisco CVR100W Wireless-N VPN Router prior to Firmware Release 1.0.1.22. Cisco Bug IDs: CSCuz72642. |
| A vulnerability in the cache server within Cisco Videoscape Distribution Suite (VDS) for Television 3.2(5)ES1 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on a targeted appliance. The vulnerability is due to excessive mapped connections exhausting the allotted resources within the system. An attacker could exploit this vulnerability by sending large amounts of inbound traffic to a device with the intention of overloading certain resources. A successful exploit could cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc39260. |
| A vulnerability in certain system script files that are installed at boot time on Cisco Application Policy Infrastructure Controllers could allow an authenticated, local attacker to gain elevated privileges and execute arbitrary commands with root privileges on an affected host operating system. The vulnerability is due to insufficient validation of user-controlled input that is supplied to certain script files of an affected system. An attacker could exploit this vulnerability by submitting crafted input to a script file on an affected system. A successful exploit could allow the attacker to gain elevated privileges and execute arbitrary commands with root privileges on the affected system. To exploit this vulnerability, the attacker would need to authenticate to the affected system by using valid administrator credentials. Cisco Bug IDs: CSCvf57274. |
| ASA 5515-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim, ASA 5510 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.4.x before 8.4.7 Interim, 8.2.x before 8.2.5 Interim, 9.1.x before 9.1.6 Interim, ASA 5555-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5520 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5505 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5525-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5585-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5540 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5515-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5555-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.4.x before 9.4.1 Interim, 9.1.x before 9.1.6 Interim, ASA 5580 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.1.x before 9.1.6 Interim, ASA 5585-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 9.4.x before 9.4.1 Interim, ASA 5525-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP. 9.1.x before 9.1.6 ASA does not check the source of the ARP request or GARP packets for addresses it performs NAT translation for under unspecified conditions. |
